TO Do

* /boot/grub/grub.cfg needs to be tweaked to point to SLKroot * /etc/defaults/grub needs GRUB_ENABLE_LINUX_LABEL=true added

usr/lib/setup/SeTEFI needs to filter SLKins_efi file system label so it's not picked up as the OS's EFI partition

[code] partition used for filesystem FS label installer mount point 1 EFI boot? fat32 SLKins_efi ? shouldn't need one?

• Requires GPT partition table

2 /boot/GRUB's config ext4 SLKins_boot ? “”

          that loads Slackware
          Installer.

          /assets/firmware/lxwhatever
          Add in the firmware here which can be flashed from within the installer
          using a post install script.
          It diverges from the rk3399, so let's hold the idea for now, but it's probably
          along the right lines.

[/code]

[code] . User DD's sd card SPI flash image:

  Flashes EFI firmware to SPI flash.

2. User dd's Slackware installer image to SD card. 3. Boots Honeycomb from SD card, boots Slackware installer.

4. User creates EFI partition , swap and OS and whatever partitions.

5. Installs Slackware to SSD on SATA 6. Reboots, removes SD card. 7. User makes honeycomb boot from SATA to boot OS.

8. First boot will find the SATA drive at SLKroot 9. and the swap at SLKswap0 10. and /boot/efi at SLKefi

SD Notes: * SLKins_efi and SLKins_boot are not relevant at this point. * The SD card can be removed and the system can run without it.

[/code]

[code] SATA Drive notes: * The /boot/efi paritition needs to be labeled as SLKefi * Rootdisk / needs to be labeled SLKroot * If it exists, the swap should be named SLKswap0 * Grub finds the boot directory on root disk * Grub boots the system ``

partition table of root diskt within installer: sdc

`-sdc3 ext4 1.0 SLKroot 02d8318a-7a96-4db4-a104-223f0334e49b 83.9G 15% /mnt

partition table of boot disk (installer) withn installation: mmcblk0

`-mmcblk0p2 ext4 1.0 SLKins_boot 18a1e569-77c1-40ad-85a3-cf425fe7c4ad

Final partitioning:

root@slackware:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 447.1G 0 disk `-sda1 8:1 0 447.1G 0 part

`-md0        9:0    0 447.1G  0 raid1
  `-md0p1  259:0    0 447.1G  0 part  /data

sdb 8:16 0 447.1G 0 disk `-sdb1 8:17 0 447.1G 0 part

`-md0        9:0    0 447.1G  0 raid1
  `-md0p1  259:0    0 447.1G  0 part  /data

sdc 8:32 0 111.8G 0 disk

`-sdc3 8:35 0 107.6G 0 part /mnt mtdblock0 31:0 0 64M 0 disk mmcblk0 179:0 0 14.8G 0 disk

`-mmcblk0p2 179:2 0 3.5G 0 part mmcblk1 179:32 0 59.2G 0 disk mmcblk1boot0 179:64 0 4M 1 disk mmcblk1boot1 179:96 0 4M 1 disk

/boot root@slackware:~# ls /mnt/boot Image-armv8@ Image-armv8-6.1.37 README-kernels.txt README.initrd@ System.map-armv8@ System.map-armv8-6.1.37 config-armv8-6.1.37 dtb@ dtb-6.1.37/ efi/ grub/ initrd-armv8@ initrd-armv8-6.1.37 local/ platform/

root@slackware:~# ls /boot/efi/EFI/slackware-15.0+/grubaa64.efi /boot/efi/EFI/slackware-15.0+/grubaa64.efi*

Notes: * /boot/extlinux/ should not exist

[/code]