The Slackware OS patches were successfully applied to on Fri Jan 30 2015.

Welcome to the Slackware Documentation Project

This is an old revision of the document!


Sound Problems on Slackware

Investigate the problem

1) See which kernel modules are loaded:

   lsmod | grep snd

Use this information along with your motherboard sound chipset to verify that the correct sound drivers are loading.

2) See which sound devices are detected by alsa:

   aplay -l

Most likely, alsa is loading the correct modules but setting the wrong sound device as default.

3) Test sound devices to see which one(s) work:

   alsamixer
   <F6>
   <select a card(s)>
   <adjust volumes and make sure they aren't muted>
   <ESC>
   
   atest -D hw0,0 test.wav   (WHERE 0,0 is card/slot 0, device 0 and test.wav is a sound file.)
   atest -D hw0,1 test.wav
   atest -D hw1,0 test.wav
   atest -D hw1,1 test.wav

PROBLEM: alsa is setting the wrong device as the default sound; you can force the correct default as follows:

FIX: Create /etc/asound.conf and add an entry for the working card/slot and device:

   pcm.!default {
        type hw
        card 1
        device 0
   }
   ctl.!default {
        type hw
        card 1
        device 0
   }

OR, if you just want the changes for a single user create ~/.asoundrc in the user's home directory and put the above in it…

Sources


In Other Languages
Translations of this page?:
QR Code
QR Code howtos:hardware:sound_problems_on_slackware (generated for current page)