¡Esta es una revisión vieja del documento!
Tabla de Contenidos
Enrutando Wi-Fi a eth (puente)
Este Howto describe, como interconectar una red inalámbrica y una cableada sobre la misma computadora Linux, para permitir que los paquetes TCP/IP no modificados pasen de una interfaz a la otra. En otros lugares esto es mencionado como un puente ethernet o extensor de línea Wi-Fi o como compartir una conexión de internet por Wi-Fi.
This Howto describes, how to interconnect wireless and wired network interfaces on the same Linux computer, to enable unmodified TCP/IP packets to pass from one interface to the other. In other places this is mentioned as network bridge or Wi-Fi line extender or Wi-Fi Internet share.
La razón para este HOWTO: la palabra puente es engañosa
The reason for this HOWTO: the word bridge is misleading
Para un puente de red nosotros asumimos que un dispositivo que transfiere paquetes de red a partir de una conexión de red a otra.
For a network bridge we assume a device that transfers unmodified network packets from one network connection to the other.
Uno puede crear un dispositivo puente (virtual) y agregar miembros a este.
Este funciona solo para miembros de puentes de tipo cableado - eth tarjetas de red. Un puente de red “conecta” miembros sobre capa 3 del modelo OSI.
Eso significa comunicación a nivel TCP/IP.
One can create a bridge device (virtual) and add members to it. This works only for bridge members of type wired - eth network cards. A network Bridge “connects” members on level 3 of the OSI model. That means communication on TCP/IP level.\\
Cuando quieres agregar un dispositivo Wi-Fi a un puente, te golpeas con una barrera: los dispositivos Wi-Fi se comunican sobre capa 2 del modelo OSI.
When you want to add a Wi-Fi device to the bridge, you hit a barrier: Wi-Fi devices communicate on level 2 of the OSI model.
Puedes buscar muchos manuales en internet que documentan como sortear esto (4addr mode). ¡Esto simplemente NO FUNCIONA!
You an find many manuals on the Internet that document how to circumvent this (in the form of putting the Wi-Fi card in 4addr mode).This simply DOES NOT WORK!\\
The Wi-Fi network card (member of the bridge) authenticates and connects to the Wireless Access Point (AP), but TCP/IP packets do not travel over the connection.
La tarjeta de red Wi-Fi (miembro del puente) se autentica y se conecta al punto de acceso inalámbrico (AP), pero los paquetes TCP/IP no viajan a través de la conexión.
So searching for “wifi eth bridge” does not return any useful solution. The culprit is the word “bridge”.
Por lo tanto, buscar “wifi eth bridge” no devuelve ninguna solución útil. El culpable es la palabra “puente”.
Solución general
Una solución de trabajo es “Proxy ARP Routing”. Simplemente habilite el reenvío de IP y luego, para cada dispositivo conectado al lado cableado (eth) de un “puente”, debe agregar una línea de enrutamiento a la tabla de enrutamiento. Esto puede se automatizado por un programa como parprouted el demonio proxy ARP de ruteo.
Solución para Slackware, paso a paso
Testeado y trabajando sobre Slackware64-14.2, kernel-4.11.6, CPU i5-7200.
Esta solución es para direcciones IP estáticas. Vea a continuación el enlace de la fuente original para un escenario que usa DHCP.
This solution is for static IP addresses. See below link of original source for a scenario that uses DHCP.
Suposiciones
:
Queremos interconectar una placa Wi-Fi y una cableada (eth). Los dispositivos de red son wlan0 y eth0.
Prepare la su máquina Slackware para que pueda comunicarse a través del adaptador de Wi-Fi (utilizando NetworkManager, rc.inet1 u otros medios..), asegurándose de que el adaptador cableado (eth) no se esté utilizando.
Assumptions:\\
We want to interconnect one Wi-Fi and one wired (eth) network card - the network devices wlan0
and eth0
.
Prepare Slackware box so that you are able to communicate over the Wi-Fi adapter (using NetworkManager, rc.inet1 or other means…), making sure that the wired (eth) adapter is not being used.
I had set up WPA2 AES verification with NetworkManager to get a usable
wpa_supplicant.conf
configuration file which I used later with rc.inet1.\\
Yo había configurado la verificación WPA2 AES con NetworkManager para obtener un archivo de configuración utilizable wpa_supplicant.conf que usé más adelante con rc.inet1.
Disable all on-boot network configurations (i.e. make sure that
Deshabilitar todo en las configuraciones de red de arranque (es decir, asegúrese que rc.networkmanager u otros archivos para la configuración de la red no son ejecutables) y configure rc.inet1 como ejecutable.
rc.networkmanager
or other files for network setup are not executable) and set rc.inet1
executable.
- IP forwarding debe estar habilitado en el kernel (a partir de la versión 2.1 el kernel de Linux no requiere una compilación explicita para esto).
- IP forwarding must be enabled in the kernel (since the 2.1 release the Linux kernel does not require an explicit compilation option for this)
- Descargar & compilar & instalar http://www.hazard.maks.net/parprouted/parprouted-0.7.tar.gz]] .
- download & compile & install http://www.hazard.maks.net/parprouted/parprouted-0.7.tar.gz
- Editar el archivo
/etc/rc.d/rc.inet1.conf
para habilitarwlan0
yeth0
. - edit
/etc/rc.d/rc.inet1.conf
so to enablewlan0
andeth0
. Assign them static IP addresses and setwlan0
to the lowest index and connect to the AP
Below are example lines from/etc/rc.d/rc.inet1.conf
- the only ones without comment sign “#” at the beginning and for WPA2 Wi-Fi authenticationIFNAME[1]="eth0" IPADDR[1]="10.200.200.223" NETMASK[1]="255.255.255.0" GATEWAY="10.200.200.1" DEBUG_ETH_UP="no" IFNAME[0]="wlan0" IPADDR[0]="10.200.200.222" NETMASK[0]="255.255.255.0" USE_DHCP[0]="" DHCP_HOSTNAME[0]="" WLAN_MODE[0]=Managed WLAN_ESSID[0]="R7500" WLAN_WPA[0]="wpa_supplicant" WLAN_WPADRIVER[0]="wext"
- set
/etc/rc.d/rc.ip_forward
executable:# chmod +x /etc/rc.d/rc.ip_forward
- add a line
/usr/local/sbin/parprouted wlan0 eth0
to
/etc/rc.d/rc.local
and make sure that this file is executable
That's all. Reboot and you have a working Wi-Fi - eth bridge, also called Wi-Fi extender or Wi-Fi Internet share.
Note on parprouted compilation:
The parprouted
man page section “Requirements” says: “parprouted requires the “ip” program from iproute2 tools to be installed in /sbin. If it is installed in another location, please replace ”/sbin/ip“ occurrences in the source with the correct path”.
Slackware installs the ip
program as /sbin/ip
so you should be OK.
Variante DHCP habilitada
Busque a continuación una solución en un enlace de origen.
Fuentes
- Escrito por Zdenko Dolar, August 2017.
- Traducido por — Ricardo Ramiro Peña 2019/02/18 01:13 (UTC)
- Fuente original:https://wiki.debian.org/BridgeNetworkConnectionsProxyArp