[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.

Welcome to the Slackware Documentation Project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
howtos:network_services:openvpn [2013/12/27 19:45 (UTC)] – Extensive update for openvpn-2.3.2 on Slackware 14.1 chrisabelahowtos:network_services:openvpn [2023/02/04 18:36 (UTC)] (current) – [13. Firewalls] chrisabela
Line 1: Line 1:
 +
 ====== OpenVPN - How to Set Up a Slackware Server and a Slackware Client ====== ====== OpenVPN - How to Set Up a Slackware Server and a Slackware Client ======
  
Line 7: Line 8:
 OpenVPN is an open source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange. It is capable of traversing network address translators (NATs) and firewalls. It was written by James Yonan and is published under the GNU General Public License (GPL). OpenVPN is an open source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange. It is capable of traversing network address translators (NATs) and firewalls. It was written by James Yonan and is published under the GNU General Public License (GPL).
  
-OpenVPN allows peers to authenticate each other using a pre-shared secret key, certificates, or username/password. When used in a multiclient-server configuration , it allows the server to release an authentication certificate for every client, using signature and Certificate authority. It uses the OpenSSL encryption library extensively, as well as the SSLv3/TLSv1 protocol, and contains many security and control features.+OpenVPN allows peers to authenticate each other using a pre-shared secret key, certificates, or username/password. When used in a multiclient-server configuration, it allows the server to release an authentication certificate for every client, using signature and Certificate authority. It uses the OpenSSL encryption library extensively, as well as the SSLv3/TLSv1 protocol, and contains many security and control features.
  
 ===== 2. Scope and Objective ===== ===== 2. Scope and Objective =====
Line 15: Line 16:
 The emphasis is to provide a reliable method that can be easily followed to set-up OpenVPN on Slackware Servers and Clients. Nevertheless the process is still not free from pitfalls and require some attention and determination. The emphasis is to provide a reliable method that can be easily followed to set-up OpenVPN on Slackware Servers and Clients. Nevertheless the process is still not free from pitfalls and require some attention and determination.
  
-This article comprises of a selection of other similar tutorials found on Internet particularly (2) and (3) and the documents contained in the downloaded source files. However these are reformatted to satisfy the objective. +This article comprises of a selection of other similar tutorials found on the Internet particularly (2) and (3) and the documents contained in the downloaded source files. However these are reformatted to satisfy the objective. 
  
 ===== 3. Installation ===== ===== 3. Installation =====
  
-Openvpn is already installed on Slackware if a default installation was followed. If this was not the case, then the package is available from the n” directory of the Slackware DVD. Refer to other Slackware specific documents on how to go about this installation.+OpenVPN is already installed on Slackware if a default installation was followed. If this was not the case, then the package is available from the "ndirectory of the Slackware repository. Refer to other Slackware specific documents on how to go about this installation.
  
-If you want to confirm that Openvpn is indeed installed, you can check it by listing the /var/log/packages/ directory:+If you want to confirm that OpenVPN is indeed installed, you can check it by listing the ''/var/lib/pkgtools/packages/'' directory:
  
 <code> <code>
-# ls /var/log/packages/openvpn*+# ls /var/lib/pkgtools/packages/openvpn*
 </code> </code>
  
 ===== 4. Requirements ===== ===== 4. Requirements =====
  
-Server and a Client computers would be needed. They would have to be connected to the Internet on two different Routers and different Network Routes.  For the purpose of this tutorial, specific details are defined in order to enhance the readability. Of course, you will probably have different addresses, so you will need to amend accordingly.+Server and a Client computers would be needed. They would have to be connected to the Internet on two different Routers and different Network Routes.  For the purpose of this tutorial, specific details are defined in order to enhance the readability. Of course, you will probably have different addresses, so you will need to amend accordingly.
  
 ==== 4.1. Server DNS ==== ==== 4.1. Server DNS ====
  
-A URL is normally used to address the Server. This is not mandatory and instead you may use only the Internet IP. However it is recommended to use a URL to access the Server from the Internet, especially if it is connected to a dynamic IP, which is typical for domestic Internet connections. The author is using noip2(4) as it is free upon subscription. Noip2 is available from http://slackbuilds.org.+A URL is normally used to address the Server. This is not mandatory and instead you may use only the Internet IP. However it is recommended to use a URL to access the Server from the Internet, especially if it is connected to a dynamic IP, which is typical for domestic Internet connections. The author is using duckdns.org (4) as it is free upon subscription.
  
 ==== 4.2. Server details ==== ==== 4.2. Server details ====
Line 40: Line 41:
 hostname: server1 hostname: server1
 IP: 192.168.200.195/255.255.255.0 IP: 192.168.200.195/255.255.255.0
-URL:  servervpn.no-ip.org+URL:  servervpn.duckdns.org
 Network Interface: eth0 Network Interface: eth0
 </code> </code>
Line 52: Line 53:
 </code> </code>
  
-==== 4.Administrator Rights ====+==== 4.Administrator Rights ====
  
-You will need to have administrator rights to set up the Openvpn. This applies to both the Server and the Client. For simplicity, in this tutorial, it will be assumed that all actions will be performed by the root user. Naturally advanced users might be more discerning.+You will need to have administrator rights to set up OpenVPN. This applies to both the Server and the Client. For simplicity, in this tutorial, it will be assumed that all actions will be performed by the root user. Naturallyadvanced users might be more discerning.
  
-==== 4.Possible Constraints and Possible Solutions for a WiFi equipped Client ====+==== 4.Possible Constraints and Possible Solutions for a WiFi equipped Client ====
  
 The availability of two Routers might be challenging. Consider that interactive sessions on both the Server and Client will be needed before the VPN is set up. If the Client is equipped with a WiFi interface there might be some easy solutions that may be considered: The availability of two Routers might be challenging. Consider that interactive sessions on both the Server and Client will be needed before the VPN is set up. If the Client is equipped with a WiFi interface there might be some easy solutions that may be considered:
  
-  - Use a 3G smart phone's "Portable Wi-Fi Hot Spot" facility to connect the Client as the VPN Client.  As 3G bandwidth is expensive you may want to minimise traffic. For example, you might want to switch off services that are not absolutely essential during the course of this exercise, such as ntpd, dropbox and tor. +  - Use the data smart phone's "Portable Wi-Fi Hot Spot" facility to connect the Client as the VPN Client. 
-  - Connect the Client to another WiFi available in the vicinity of the Server. Some lucky people live in areas were benevolent neighbours provide them with openly accessible Internet WiFi. It is recommended to request permission before taking up this solution. In case that no such open service exists, you may find it appropriate to request a temporary password from a friendly neighbour for the private encrypted WiFi service+  - Nowadays, many public premises, such as libraries, gardens and Local Councils provide free WiFi service. Other places such as fast food outlets, pubs, cafés, etc. also provide free WiFi from their location to their esteemed customers.
-  - Nowadays, many governmental premises, such as libraries and Local Councils provide free WiFi service. Other places such as fast food outlets, pubs, cafés, etc. also provide free WiFi from their location to their valuable customers. You may access the Server via an available service such as SSH from a WiFi equipped Client. If this option is chosen for this solution, be aware that the Client may have to pass through some firewalls. Besides the VPN connection might be a breach of the terms of conditions that should be accepted before using the WiFi service.+
  
 ===== 5. Creating a Public Key Infrastructure (PKI) using the easy-rsa Scripts ===== ===== 5. Creating a Public Key Infrastructure (PKI) using the easy-rsa Scripts =====
  
-The PKI may be created on any computer with a VPN installation, but it is probably more sensible to be done on both the Server and the Client as both would need it. An easy way to build the PKI is to use the easy-rsa scripts. These may be downloaded like this:+The PKI may be created on any computer, but it is probably more sensible to be done on both the Server and the Client as both would need it. An easy way to build the PKI is to use the ''easy-rsa'' scripts. These may be downloaded like this:
  
 <code> <code>
 # cd # cd
-# git clone git://github.com/OpenVPN/easy-rsa+# git clone http://github.com/OpenVPN/easy-rsa
 </code> </code>
  
Line 76: Line 76:
  
 <code> <code>
-# tar cvf easy-rsa.tar easy-rsa+# tar czvf easy-rsa.tgz easy-rsa
 </code> </code>
  
Line 102: Line 102:
 </code> </code>
  
-You will be prompted for another PEM pass phrase to reverify it and to confirm that the name of the entity is indeed server1. Now you may proceed to sign this request:+You will be prompted for the PEM pass phraseto reverify it and to confirm that the name of the entity is indeed server1. Now you may proceed to sign this request:
  
 <code> <code>
Line 108: Line 108:
 </code> </code>
  
-Confirm the request by entering yes, then enter original ca PEM passphrase.+Confirm the request by entering "yes", then enter the original ca PEM passphrase.
  
 Now create two additional key files: Now create two additional key files:
Line 116: Line 116:
 # openssl dhparam -out dh2048.pem 2048 # openssl dhparam -out dh2048.pem 2048
 # cd /etc/openvpn/keys/ # cd /etc/openvpn/keys/
-# /usr/sbin/openvpn --genkey --secret ta.key +# /usr/sbin/openvpn --genkey secret ta.key 
 </code> </code>
  
Line 123: Line 123:
 Follow these steps on the Client to create the needed keys and certificates: Follow these steps on the Client to create the needed keys and certificates:
  
-You will need the easy-rsa scripts, so you can copy easy-rsa tarball from the Server to the Client and extract it:+You will need the ''easy-rsa'' scripts, so you can copy the ''easy-rsa'' tarball from the Server to the Client and extract it:
  
 <code> <code>
 # cd # cd
-# tar xvf easy-rsa.tar+# tar xvf easy-rsa.tgz
 </code> </code>
  
Line 138: Line 138:
 </code> </code>
  
-You will be prompted for another PEM pass phrase, to re-verify it and to confirm that the name of the entity is indeed client1. In this article I am using the hostnames for clarity (in this case: cleint1), but you may choose any name.+You will be prompted for PEM pass phrase, to re-verify it and to confirm that the name of the entity is indeed client1. In this article I am using the hostnames for clarity (in this case: client1), but you may choose any name.
  
-Copy pki/reqs/client1.req back to the Server.+Copy ''pki/reqs/client1.req'' back to the Server.
  
 === 5.2.1 Sign the Client's request on the Server === === 5.2.1 Sign the Client's request on the Server ===
  
-For the purpose of this article, it is assumed that the Client's request file (client1.req) been transferred to the /root/openvpn/directory of the Server. Now you can proceed to import and sign the client1 request:+For the purpose of this article, it is assumed that the Client's request file (''client1.req''has been transferred to the ''$HOME/openvpn/'' directory of the Server. Now you can proceed to import and sign the client1 request:
  
 <code> <code>
-# cd /root/easy-rsa/easyrsa3 +# cd $HOME/easy-rsa/easyrsa3 
-# ./easyrsa import-req /root/openvpn/client1.req client1+# ./easyrsa import-req $HOME/openvpn/client1.req client1
 # ./easyrsa sign-req client client1 # ./easyrsa sign-req client client1
 </code> </code>
  
-When prompted enter yes” and the server1 CA PEM pass phrase. +When prompted enter "yesand the server1 CA PEM pass phrase. 
  
-Copy the generated /root/easy-rsa/easyrsa3/pki/issued/client1.crt+Copy the generated ''$HOME/easy-rsa/easyrsa3/pki/issued/client1.crt''
 back to the client. back to the client.
  
 ===== 6. Setting up the Server ===== ===== 6. Setting up the Server =====
  
-Copy the following files generated by the easy-rsa scripts to their respective directories in the /etc/openvpn/ directory:+Copy the following files generated by the easy-rsa scripts to their respective directories in the ''/etc/openvpn/'' directory:
  
 <code> <code>
-# cp /root/easy-rsa/easyrsa3/pki/ca.crt \+# cp $HOME/easy-rsa/easyrsa3/pki/ca.crt \
 > /etc/openvpn/certs/ > /etc/openvpn/certs/
-# cp /root/easy-rsa/easyrsa3/pki/issued/server1.crt \+# cp $HOME/easy-rsa/easyrsa3/pki/issued/server1.crt \
 > /etc/openvpn/certs/ > /etc/openvpn/certs/
-# cp /root/easy-rsa/easyrsa3/pki/private/server1.key \+# cp $HOME/easy-rsa/easyrsa3/pki/private/server1.key \
 > /etc/openvpn/keys/ > /etc/openvpn/keys/
 </code> </code>
  
-Copy the sample server.conf from the openvpn source onto the openvpn'configuration directory. The source of openvpn may be obtained from Slackware's source DVD or your favourite Slackware mirror or from http://openvpn.net. In the following example I am downloading the source from ftp.slackware.com+Copy the provided ''server.conf'' from the OpenVPN package to the configuration directory:
  
 <code> <code>
-cd /tmp/ +cp /etc/openvpn/sample-config-files/server.conf /etc/openvpn/
-# wget -c \ +
-> ftp://ftp.slackware.com/pub/slackware/slackware/source/n/openvpn/openvpn-*.tar.?+
-# cd /usr/src/ +
-# tar xvf /tmp/openvpn-*.tar.?z+
 </code> </code>
  
-Copy the file server.conf contained in the source to the openvpn configuration directory: +Edit the following lines of ''/etc/openvpn/server.conf''
- +
-<code> +
-# cp openvpn-2.3.2/sample/sample-config-files/server.conf \ +
-> /etc/openvpn/ +
-</code> +
- +
-Edit the following lines of /etc/openvpn/server.conf+
  
 From these lines: From these lines:
Line 195: Line 184:
 cert server.crt cert server.crt
 key server.key  # This file should be kept secret key server.key  # This file should be kept secret
- 
  
 dh dh1024.pem dh dh1024.pem
-;tls-auth ta.key 0 # This file is secret 
  
-;user nobody  +;topology subnet 
-;group nobody+ 
 +tls-auth ta.key 0 # This file is secret 
 + 
 +cipher AES-256-CBC
  
 ;log-append  openvpn.log ;log-append  openvpn.log
 +
 </code> </code>
  
Line 214: Line 205:
  
 dh /etc/openvpn/certs/dh2048.pem dh /etc/openvpn/certs/dh2048.pem
 +
 +topology subnet
  
 tls-auth /etc/openvpn/keys/ta.key 0 # This file is secret tls-auth /etc/openvpn/keys/ta.key 0 # This file is secret
  
-user nobody  +data-ciphers-fallback AES-256-CBC
-group nobody+
  
 log-append  /var/log/openvpn.log log-append  /var/log/openvpn.log
 </code> </code>
  
-Finally add the following to /etc/openvpn/server.conf+<note>Note that comments in server.conf may start with either start with or ; In order to help you with entering parameters, the former are used to comment out text while the latter are for commented out configuration lines.</note>
- +
-<code> +
-If you want to use OpenVPN as a daemon, uncomment this line. +
-# Generally speaking, servers should run OpenVPN as a daemon +
-daemon +
-</code>+
  
-My full server.conf is the following:+Create a file containing your PEM pass phrase in a secure location; e.g. ''/root/password.ovpn'' which contains only this pass phrase. Then restrict its permission:
  
 <code> <code>
-################################################# +chmod 600 /root/password.ovpn
-# Sample OpenVPN 2.0 config file for            # +
-# multi-client server.                          # +
-#                                               # +
-# This file is for the server side              # +
-# of a many-clients <-> one-server              # +
-# OpenVPN configuration.                        # +
-#                                               # +
-# OpenVPN also supports                         # +
-# single-machine <-> single-machine             # +
-# configurations (See the Examples page         # +
-# on the web site for more info).               # +
-#                                               # +
-# This config should work on Windows            # +
-# or Linux/BSD systems.  Remember on            # +
-# Windows to quote pathnames and use            # +
-# double backslashes, e.g.:                     # +
-# "C:\\Program Files\\OpenVPN\\config\\foo.key"+
-#                                               # +
-# Comments are preceded with '#' or ';'         # +
-################################################# +
- +
-# Which local IP address should OpenVPN +
-# listen on? (optional) +
-;local a.b.c.d +
- +
-# Which TCP/UDP port should OpenVPN listen on? +
-# If you want to run multiple OpenVPN instances +
-# on the same machine, use a different port +
-# number for each one.  You will need to +
-# open up this port on your firewall. +
-port 1194 +
- +
-# TCP or UDP server? +
-;proto tcp +
-proto udp +
- +
-# "dev tun" will create a routed IP tunnel, +
-# "dev tap" will create an ethernet tunnel. +
-# Use "dev tap0" if you are ethernet bridging +
-# and have precreated a tap0 virtual interface +
-# and bridged it with your ethernet interface. +
-# If you want to control access policies +
-# over the VPN, you must create firewall +
-# rules for the the TUN/TAP interface. +
-# On non-Windows systems, you can give +
-# an explicit unit number, such as tun0. +
-# On Windows, use "dev-node" for this. +
-# On most systems, the VPN will not function +
-# unless you partially or fully disable +
-# the firewall for the TUN/TAP interface. +
-;dev tap +
-dev tun +
- +
-# Windows needs the TAP-Win32 adapter name +
-# from the Network Connections panel if you +
-# have more than one.  On XP SP2 or higher, +
-# you may need to selectively disable the +
-# Windows firewall for the TAP adapter. +
-# Non-Windows systems usually don't need this. +
-;dev-node MyTap +
- +
-# SSL/TLS root certificate (ca), certificate +
-# (cert), and private key (key).  Each client +
-# and the server must have their own cert and +
-# key file.  The server and all clients will +
-# use the same ca file. +
-+
-# See the "easy-rsa" directory for a series +
-# of scripts for generating RSA certificates +
-# and private keys.  Remember to use +
-# a unique Common Name for the server +
-# and each of the client certificates. +
-+
-# Any X509 key management system can be used. +
-# OpenVPN can also use a PKCS #12 formatted key file +
-# (see "pkcs12" directive in man page). +
-ca /etc/openvpn/certs/ca.crt +
-cert /etc/openvpn/certs/server1.crt +
-key /etc/openvpn/keys/server1.key  # This file should be kept secret +
- +
-# Diffie hellman parameters. +
-# Generate your own with: +
-#   openssl dhparam -out dh1024.pem 1024 +
-# Substitute 2048 for 1024 if you are using +
-# 2048 bit keys.  +
-dh /etc/openvpn/certs/dh2048.pem +
- +
-# Configure server mode and supply a VPN subnet +
-# for OpenVPN to draw client addresses from. +
-# The server will take 10.8.0.1 for itself, +
-# the rest will be made available to clients. +
-# Each client will be able to reach the server +
-# on 10.8.0.1. Comment this line out if you are +
-# ethernet bridging. See the man page for more info. +
-server 10.8.0.0 255.255.255.0 +
- +
-# Maintain a record of client <-> virtual IP address +
-# associations in this file.  If OpenVPN goes down or +
-# is restarted, reconnecting clients can be assigned +
-# the same virtual IP address from the pool that was +
-# previously assigned. +
-ifconfig-pool-persist ipp.txt +
- +
-# Configure server mode for ethernet bridging. +
-# You must first use your OS's bridging capability +
-# to bridge the TAP interface with the ethernet +
-# NIC interface.  Then you must manually set the +
-# IP/netmask on the bridge interface, here we +
-# assume 10.8.0.4/255.255.255.0.  Finally we +
-# must set aside an IP range in this subnet +
-# (start=10.8.0.50 end=10.8.0.100) to allocate +
-# to connecting clients.  Leave this line commented +
-# out unless you are ethernet bridging. +
-;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 +
- +
-# Configure server mode for ethernet bridging +
-# using a DHCP-proxy, where clients talk +
-# to the OpenVPN server-side DHCP server +
-# to receive their IP address allocation +
-# and DNS server addresses.  You must first use +
-# your OS's bridging capability to bridge the TAP +
-# interface with the ethernet NIC interface. +
-# Note: this mode only works on clients (such as +
-# Windows), where the client-side TAP adapter is +
-# bound to a DHCP client. +
-;server-bridge +
- +
-# Push routes to the client to allow it +
-# to reach other private subnets behind +
-# the server.  Remember that these +
-# private subnets will also need +
-# to know to route the OpenVPN client +
-# address pool (10.8.0.0/255.255.255.0) +
-# back to the OpenVPN server. +
-;push "route 192.168.10.0 255.255.255.0" +
-;push "route 192.168.20.0 255.255.255.0" +
- +
-# To assign specific IP addresses to specific +
-# clients or if a connecting client has a private +
-# subnet behind it that should also have VPN access, +
-# use the subdirectory "ccd" for client-specific +
-# configuration files (see man page for more info). +
- +
-# EXAMPLE: Suppose the client +
-# having the certificate common name "Thelonious" +
-# also has a small subnet behind his connecting +
-# machine, such as 192.168.40.128/255.255.255.248. +
-# First, uncomment out these lines: +
-;client-config-dir ccd +
-;route 192.168.40.128 255.255.255.248 +
-# Then create a file ccd/Thelonious with this line: +
-#   iroute 192.168.40.128 255.255.255.248 +
-# This will allow Thelonious' private subnet to +
-# access the VPN.  This example will only work +
-# if you are routing, not bridging, i.e. you are +
-# using "dev tun" and "server" directives. +
- +
-# EXAMPLE: Suppose you want to give +
-# Thelonious a fixed VPN IP address of 10.9.0.1. +
-# First uncomment out these lines: +
-;client-config-dir ccd +
-;route 10.9.0.0 255.255.255.252 +
-# Then add this line to ccd/Thelonious: +
-#   ifconfig-push 10.9.0.1 10.9.0.2 +
- +
-# Suppose that you want to enable different +
-# firewall access policies for different groups +
-# of clients.  There are two methods: +
-# (1) Run multiple OpenVPN daemons, one for each +
-#     group, and firewall the TUN/TAP interface +
-#     for each group/daemon appropriately. +
-# (2) (Advanced) Create a script to dynamically +
-#     modify the firewall in response to access +
-#     from different clients.  See man +
-#     page for more info on learn-address script. +
-;learn-address ./script +
- +
-# If enabled, this directive will configure +
-# all clients to redirect their default +
-# network gateway through the VPN, causing +
-# all IP traffic such as web browsing and +
-# and DNS lookups to go through the VPN +
-# (The OpenVPN server machine may need to NAT +
-# or bridge the TUN/TAP interface to the internet +
-# in order for this to work properly). +
-;push "redirect-gateway def1 bypass-dhcp" +
- +
-# Certain Windows-specific network settings +
-# can be pushed to clients, such as DNS +
-# or WINS server addresses.  CAVEAT: +
-# http://openvpn.net/faq.html#dhcpcaveats +
-# The addresses below refer to the public +
-# DNS servers provided by opendns.com. +
-;push "dhcp-option DNS 208.67.222.222" +
-;push "dhcp-option DNS 208.67.220.220" +
- +
-# Uncomment this directive to allow different +
-# clients to be able to "see" each other. +
-# By default, clients will only see the server. +
-# To force clients to only see the server, you +
-# will also need to appropriately firewall the +
-# server's TUN/TAP interface. +
-;client-to-client +
- +
-# Uncomment this directive if multiple clients +
-# might connect with the same certificate/key +
-# files or common names.  This is recommended +
-# only for testing purposes.  For production use, +
-# each client should have its own certificate/key +
-# pair. +
-+
-# IF YOU HAVE NOT GENERATED INDIVIDUAL +
-# CERTIFICATE/KEY PAIRS FOR EACH CLIENT, +
-# EACH HAVING ITS OWN UNIQUE "COMMON NAME", +
-# UNCOMMENT THIS LINE OUT. +
-;duplicate-cn +
- +
-# The keepalive directive causes ping-like +
-# messages to be sent back and forth over +
-# the link so that each side knows when +
-# the other side has gone down. +
-# Ping every 10 seconds, assume that remote +
-# peer is down if no ping received during +
-# a 120 second time period. +
-keepalive 10 120 +
- +
-# For extra security beyond that provided +
-# by SSL/TLS, create an "HMAC firewall" +
-# to help block DoS attacks and UDP port flooding. +
-+
-# Generate with: +
-#   openvpn --genkey --secret ta.key +
-+
-# The server and each client must have +
-# a copy of this key. +
-# The second parameter should be '0' +
-# on the server and '1' on the clients. +
-tls-auth /etc/openvpn/keys/ta.key 0 # This file is secret +
- +
-# Select a cryptographic cipher. +
-# This config item must be copied to +
-# the client config file as well. +
-;cipher BF-CBC        # Blowfish (default) +
-;cipher AES-128-CBC   # AES +
-;cipher DES-EDE3-CBC  # Triple-DES +
- +
-# Enable compression on the VPN link. +
-# If you enable it here, you must also +
-# enable it in the client config file. +
-comp-lzo +
- +
-# The maximum number of concurrently connected +
-# clients we want to allow. +
-;max-clients 100 +
- +
-# It's a good idea to reduce the OpenVPN +
-# daemon's privileges after initialization. +
-+
-# You can uncomment this out on +
-# non-Windows systems. +
-user nobody +
-group nobody +
- +
-# The persist options will try to avoid +
-# accessing certain resources on restart +
-# that may no longer be accessible because +
-# of the privilege downgrade. +
-persist-key +
-persist-tun +
- +
-# Output a short status file showing +
-# current connections, truncated +
-# and rewritten every minute. +
-status openvpn-status.log +
- +
-# By default, log messages will go to the syslog (or +
-# on Windows, if running as a service, they will go to +
-# the "\Program Files\OpenVPN\log" directory). +
-# Use log or log-append to override this default. +
-# "log" will truncate the log file on OpenVPN startup, +
-# while "log-append" will append to it.  Use one +
-# or the other (but not both). +
-;log         openvpn.log +
-log-append  /var/log/openvpn.log +
- +
-# Set the appropriate level of log +
-# file verbosity. +
-+
-# 0 is silent, except for fatal errors +
-# 4 is reasonable for general usage +
-# 5 and 6 can help to debug connection problems +
-# 9 is extremely verbose +
-verb 3 +
- +
-# Silence repeating messages.  At most 20 +
-# sequential messages of the same message +
-# category will be output to the log. +
-;mute 20 +
- +
-# If you want to use OpenVPN as a daemon, uncomment this line. +
-# Generally speaking, servers should run OpenVPN as a daemon +
-daemon+
 </code> </code>
  
-<note>Note that comments in server.conf may be either start with # or ; In order to help you with entering parameters, the former are used to comment out text while the latter are for commented out configuration lines+On the Server, edit ''/etc/openvpn/server.conf'' with the following lines:
-Copy the rc.openvpn listed hereunder and place under /etc/rc.d/</note>+
  
 <code> <code>
-#!/bin/sh  +askpass /root/password.ovpn 
-#  +auth-nocache
-# /etc/rc.d/rc.openvpn  +
-#  +
-# Start/stop/restart the openvpn server.  +
-+
-  +
-ovpn_start() {  +
-  if [ -x /usr/sbin/openvpn -a -r /etc/openvpn/server.conf ]; then  +
-    echo "Starting OpenVPN:  /usr/sbin/openvpn server.conf"  +
-    /usr/sbin/openvpn /etc/openvpn/server.conf +
-  fi  +
-}  +
- +
-ovpn_stop() {  +
-  killall openvpn  +
-}  +
- +
-ovpn_restart() {  +
-  ovpn_stop  +
-  sleep 2  +
-  ovpn_start  +
-}  +
- +
-case "$1" in  +
-'start')  +
-  ovpn_start  +
-  ;;  +
-'stop')  +
-  ovpn_stop  +
-  ;;  +
-'restart')  +
-  ovpn_restart  +
-  ;;  +
-*)  +
-  echo "Usage: $0 {start|stop|restart}"  +
-esac+
 </code> </code>
  
-Then give it executable permissions:+Create a directory to store the OpenVPN service PID and restrict its permissions:
  
 <code> <code>
-# chmod 755 /etc/rc.d/rc.openvpn+mkdir /run/openvpn/ 
 +chmod 700 /run/openvpn/
 </code> </code>
  
-Eventually when you start openvpn on the serveryou may read /var/log/openvpn.log to verify that your work has been successful:+Give the OpenVPN ''rc'' script executable permissionsso that the OpenVPN service is started everytime you boot up:
  
 <code> <code>
-cat /var/log/openvpn.log+chmod +x /etc/rc.d/rc.openvpn
 </code> </code>
  
 ===== 7. Port Forwarding ===== ===== 7. Port Forwarding =====
  
-YYou will need to forward traffic from the port you have chosen for Openvpn to be routed to the Server. To accomplish this you will need to provide your Server with a fixed IP and you will need to configure your router. You may use netconfig, wicd or network-manager to set the fixed IP on Slackware. Then you also need to consult the documentation provided with your router to set up the selected IP address reserved for the Server, and the port forwarding. For our default Openvpn set up, the UDP Port would be 1194. +You will need to forward traffic from the port you have chosen for OpenVPN to be routed to the Server. To accomplish this you will need to provide your Server with a fixed IP and you will need to configure your router. You may use netconfig to set the fixed IP on Slackware. Then you also need to consult the documentation provided with your router to set up the selected IP address reserved for the Server, and the port forwarding. For this default OpenVPN set up, the UDP Port would be 1194. 
  
-In case if you have misplaced such documentation, you may search on the Internet on how this may be achieved. A good place to start is http://portforward.com/.+In case if you have misplaced such documentation, you may search on the Internet on how this may be achieved. A good place to start is https://portforward.com/.
  
 ===== 8. Setting up the Client ===== ===== 8. Setting up the Client =====
Line 604: Line 253:
 On the Client machine perform the following instructions to set it up. On the Client machine perform the following instructions to set it up.
  
-Download the openvpn source tarball and extracted it as explained in Chapter 6, then proceed to copy the included configuration file for clients:+Copy the provided ''client.conf'' from the OpenVPN package to the configuration directory:
  
 <code> <code>
-# cp /usr/src/openvpn-*/sample/sample-config-files/client.conf +# cp /etc/openvpn/sample-config-files/client.conf /etc/openvpn/
-/etc/openvpn/+
 </code> </code>
  
Line 623: Line 271:
 key client.key  key client.key 
  
-;tls-auth ta.key 1+tls-auth ta.key 1 
 + 
 +cipher AES-256-CBC
 </code> </code>
  
Line 629: Line 279:
  
 <code> <code>
-remote servervpn.no-ip.org 1194+remote servervpn.duckdns.org 1194
  
 user nobody  user nobody 
Line 639: Line 289:
  
 tls-auth /etc/openvpn/keys/ta.key 1 tls-auth /etc/openvpn/keys/ta.key 1
 +
 +data-ciphers-fallback AES-256-CBC
 +
 +auth-nocache
 +
 +log-append  /var/log/openvpn.log
 </code> </code>
  
-<note>Note that comments in client.conf may be either # or ; The former are used to comment out text while the latter are for commented out configuration lines. This should help you a lot in the configuration process.</note>+<note>Note that comments in client.conf may start with either # or ; The former are used to comment out text while the latter are for commented out configuration lines. This should help you a lot in the configuration process.</note>
  
-You will need the this files that were generated by the Client's easy-rsa scripts:+You will need this file that was generated by the Client'''easy-rsa'' scripts:
  
 <code> <code>
-/root/easy-rsa/easyrsa3/pki/private/client1.key+cp $HOME/easy-rsa/easyrsa3/pki/private/client1.key 
 +> /etc/openvpn/keys/
 </code> </code>
  
-and the following from the Server's easy-rsa scripts:+and the following from the Server'''easy-rsa'' scripts:
  
 <code> <code>
-ca.crt +$HOME/easy-rsa/easyrsa3/pki/ca.crt 
-ta.key+$HOME/easy-rsa/easyrsa3/pki/issued/client1.crt
 </code> </code>
  
-You will also need client1.crt generated by the Server as explained above in Chapter 5.2.1. +and this file from the Server as well:
  
-Place these files as indicated in client.conf. So ca.crt and client1.crt go under /etc/openvpn/certswhile client1.key and ta.key go under /etc/openvpn/keys/+<code> 
 +/etc/openvpn/keys/ta.key 
 +</code>
  
-Also in client.conf, comment out the line:+Place these files as indicated in ''client.conf''. So ''ca.crt'' and ''client1.crt'' go under ''/etc/openvpn/certs/'' while ''client1.key'' and ''ta.key'' go under ''/etc/openvpn/keys/'' 
 + 
 +===== 9. Testing the VPN ===== 
 + 
 +On the Server:
  
 <code> <code>
-ns-cert-type server+# /etc/rc.d/rc.openvpn restart
 </code> </code>
  
-and insert the line:+Enter the Server PEM pass phrase when prompted. 
 + 
 +On the Client:
  
 <code> <code>
-remote-cert-tls server+# /usr/sbin/openvpn --config /etc/openvpn/client.conf
 </code> </code>
  
-My full client.conf is the following:+Enter the Client PEM pass phrase when promptedTo stop OpenVPN on the Client just hit CTRL+C 
 + 
 +On both you should see a new network interface called tun0. To verify, run this ip command:
  
 <code> <code>
-############################################## +/usr/sbin/ip addr show tun0 
-# Sample client-side OpenVPN 2.0 config file # +</code>
-# for connecting to multi-client server.     # +
-#                                            # +
-# This configuration can be used by multiple # +
-# clients, however each client should have   # +
-# its own cert and key files.                # +
-#                                            # +
-# On Windows, you might want to rename this  # +
-# file so it has a .ovpn extension           # +
-##############################################+
  
-# Specify that we are a client and that we +Naturally you can ping the Server from Client (or vice versa):
-# will be pulling certain config file directives +
-# from the server. +
-client+
  
-# Use the same setting as you are using on +For examplefrom the Client:
-# the server. +
-# On most systems, the VPN will not function +
-# unless you partially or fully disable +
-# the firewall for the TUN/TAP interface. +
-;dev tap +
-dev tun+
  
-Windows needs the TAP-Win32 adapter name +<code> 
-# from the Network Connections panel +ping -c 3 10.8.0.1 
-# if you have more than one On XP SP2, +PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data.  
-# you may need to disable the firewall +64 bytes from 10.8.0.1: icmp_req=1 ttl=64 time=2888 ms  
-# for the TAP adapter+64 bytes from 10.8.0.1: icmp_req=2 ttl=64 time=1997 ms  
-;dev-node MyTap+64 bytes from 10.8.0.1: icmp_req=3 ttl=64 time=1324 ms 
  
-# Are we connecting to a TCP or +--- 10.8.0.1 ping statistics ---  
-# UDP server?  Use the same setting as +3 packets transmitted, 3 received, 0% packet loss, time 1999ms  
-# on the server+rtt min/avg/max/mdev = 1324.475/2070.293/2888.429/640.527 ms, pipe 3 
-;proto tcp +</code>
-proto udp+
  
-# The hostname/IP and port of the server. +If you fail to set-up a VPN connection, you may want to look in ''/var/log/openvpn.log''
-# You can have multiple remote entries +
-to load balance between the servers. +
-remote servervpn.no-ip.org 1194 +
-;remote my-server-2 1194+
  
-# Choose a random host from the remote +<code> 
-# list for load-balancing Otherwise +tal -f /var/log/openvpn.log 
-# try hosts in the order specified. +</code>
-;remote-random+
  
-# Keep trying indefinitely to resolve the +===== 10Logrotate (6) =====
-# host name of the OpenVPN server Very useful +
-# on machines which are not permanently connected +
-# to the internet such as laptops. +
-resolv-retry infinite+
  
-# Most clients don't need to bind to +This is logrotate configuration for OpenVPN. It prevents you from ending up with huge OpenVPN log files. ''copytruncate'' option here is very important - OpenVPN does not want to close the logfile it's writing to, so this file is automatically truncated after copying its contentsEdit this file as ''/etc/logrotate.d/openvpn''
-# a specific local port number. +
-nobind+
  
-# Downgrade privileges after initialization (non-Windows only) +<code> 
-user nobody +/var/log/openvpn.log { 
-group nobody+    daily 
 +    rotate 12 
 +    compress 
 +    copytruncate 
 +    delaycompress 
 +    missingok 
 +    notifempty 
 +
 +</code>
  
-# Try to preserve some state across restarts. +===== 11Storing the PEM pass phrase in a secure file and automatic start of service after booting =====
-persist-key +
-persist-tun+
  
-# If you are connecting through an +As hinted in Chapter 6, to start the OpenVPN service on bootan entry in ''/etc/rc.d/rc.local'' is not needed as the provided ''/etc/rc.d/rc.openvpn'' is started by ''/etc/rc.d/rc.inet2'' at boot up.
-# HTTP proxy to reach the actual OpenVPN +
-# serverput the proxy server/IP and +
-# port number here See the man page +
-# if your proxy server requires +
-# authentication. +
-;http-proxy-retry # retry on connection failures +
-;http-proxy [proxy server] [proxy port #]+
  
-# Wireless networks often produce a lot +As ''/etc/rc.d/rc.openvpn'' starts OpenVPN with ''--daemon'' option, it would not start if you still need to enter the password. In Chapter 6, we showed how this can be resolved for the Server. Naturally, if this is your intention, you may repeat the process for the Client:
-# of duplicate packets Set this flag +
-# to silence duplicate packet warnings. +
-;mute-replay-warnings+
  
-# SSL/TLS parms. +On the Client, edit ''/etc/openvpn/client.conf'' with the following lines:
-# See the server config file for more +
-# description.  It's best to use +
-# a separate .crt/.key file pair +
-# for each client.  A single ca +
-# file can be used for all clients. +
-ca /etc/openvpn/certs/ca.crt +
-cert /etc/openvpn/certs/client1.crt +
-key /etc/openvpn/keys/client1.key+
  
-# Verify server certificate by checking +<code> 
-# that the certicate has the nsCertType +askpass /root/password.ovpn 
-# field set to "server" This is an +auth-nocache 
-# important precaution to protect against +</code>
-# a potential attack discussed here: +
-#  http://openvpn.net/howto.html#mitm +
-+
-# To use this feature, you will need to generate +
-# your server certificates with the nsCertType +
-# field set to "server" The build-key-server +
-# script in the easy-rsa folder will do this. +
-;ns-cert-type server +
-remote-cert-tls server+
  
-# If tls-auth key is used on the server +Create directory to store the OpenVPN service PID and restrict its permissions:
-# then every client must also have the key. +
-tls-auth /etc/openvpn/keys/ta.key 1+
  
-# Select a cryptographic cipher. +<code> 
-# If the cipher option is used on the server +mkdir /run/openvpn/ 
-# then you must also specify it here. +chmod 700 /run/openvpn/ 
-;cipher x+</code>
  
-# Enable compression on the VPN link. +An alternate method (albeit less secure) is to remove the passphrase from ''server1.key'' and/or ''client1.key'' files altogether.  Ensure to restrict the permissions of the ensuing keyFor the Server:
-# Don't enable this unless it is also +
-# enabled in the server config file. +
-comp-lzo+
  
-Set log file verbosity+<code> 
-verb 3+cd /etc/openvpn/keys 
 +# openssl rsa -in server1.key -out tmp.key 
 +</code>
  
-# Silence repeating messages +Enter the pass phrase.
-;mute 20 +
-#</code> +
- +
-===== 9Testing the VPN ===== +
- +
-On the Server:+
  
 <code> <code>
-/etc/rc.d/rc.openvpn start+mv tmp.key server1.key 
 +# chmod 600 server1.key
 </code> </code>
  
-Enter the Server PEM pass phrase when prompted. +If you had them remove these lines from ''/etc/openvpn/server.conf''
- +
-On the Client:+
  
 <code> <code>
-/usr/sbin/openvpn /etc/openvpn/client.conf+askpass /root/password.ovpn 
 +auth-nocache
 </code> </code>
  
-Enter the Client PEM pass phrase when prompted. To stop openVPN on the Client just hit CTRL+C +Similarly, this can be repeated for the Client:
- +
-On both you should see a new network interface called tun0. On the Server, I obtained the following:+
  
 <code> <code>
-ifconfig tun0  +cd /etc/openvpn/keys 
-tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500  +# openssl rsa -in client1.key -out tmp.key
-        inet 10.8.0.1  netmask 255.255.255.255  destination 10.8.0.2  +
-        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 100  (UNSPEC)  +
-        RX packets 0  bytes 0 (0.0 B)  +
-        RX errors 0  dropped 0  overruns 0  frame 0  +
-        TX packets 0  bytes 0 (0.0 B)  +
-        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0 +
 </code> </code>
  
-Similarly on the Client:+Enter the pass phrase.
  
 <code> <code>
-ifconfig tun0  +mv tmp.key client1.key 
-tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500  +# chmod 600 client1.key
-        inet 10.8.0.6  netmask 255.255.255.255  destination 10.8.0.5  +
-        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 100  (UNSPEC)  +
-        RX packets 0  bytes 0 (0.0 B)  +
-        RX errors 0  dropped 0  overruns 0  frame 0  +
-        TX packets 0  bytes 0 (0.0 B)  +
-        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0+
 </code> </code>
  
-Naturally you can ping the Server from Client (or vice versa): +Then, if you had itremove this line from ''/etc/openvpn/client.conf''
- +
-For example, from the Client:+
  
 <code> <code>
-# ping -c 3 10.8.0.1 +askpass /root/password.ovpn
-PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data.  +
-64 bytes from 10.8.0.1: icmp_req=1 ttl=64 time=2888 ms  +
-64 bytes from 10.8.0.1: icmp_req=2 ttl=64 time=1997 ms  +
-64 bytes from 10.8.0.1: icmp_req=3 ttl=64 time=1324 ms  +
- +
---- 10.8.0.1 ping statistics ---  +
-3 packets transmitted, 3 received, 0% packet loss, time 1999ms  +
-rtt min/avg/max/mdev = 1324.475/2070.293/2888.429/640.527 ms, pipe 3+
 </code> </code>
  
-To start the openvpn service automatically on boot-up from the Serverinclude these lines in /etc/rc.d/rc.local+If you intend to use the ''rc'' script on the Clientproceed like this:
  
 <code> <code>
-# Start the OpenVPN Server +mkdir /run/openvpn/ 
-if [ -x /etc/rc.d/rc.openvpn-server ]; then  +chmod 700 /run/openvpn
-  /etc/rc.d/rc.openvpn-server start  +chmod +x /etc/rc.d/rc.openvpn
-fi+
 </code> </code>
  
-===== 10. IP Routing =====+===== 12. IP Routing =====
  
 Up to now we have created a tunnel device on both the Server and the Client called tun0 which is visible only to these two machines. However more work is needed to route the Client's connection via tun0 and then to the WAN that is connected to the Server. Up to now we have created a tunnel device on both the Server and the Client called tun0 which is visible only to these two machines. However more work is needed to route the Client's connection via tun0 and then to the WAN that is connected to the Server.
  
-==== 10.1 Server Configuration ====+==== 12.1 IP Forwarding ====
  
-Enable IP forwarding:+On the Server, enable IP forwarding:
  
 <code> <code>
Line 891: Line 473:
 </code> </code>
  
-Create a file with the same name of the client (in this case client1) and enter the following line in /etc/openvpn/ccd/client1+Create a file with the same name of the client (in this case ''client1'') and enter the following line in ''/etc/openvpn/ccd/client1''
  
 <code> <code>
Line 899: Line 481:
 Replace 192.168.1.0 255.255.255.0 by the Network Route of your Client. Replace 192.168.1.0 255.255.255.0 by the Network Route of your Client.
  
-Similarly edit /etc/openvpn/server.conf with the following lines:+Similarly edit ''/etc/openvpn/server.conf'' with the following lines:
  
 <code> <code>
 push "route 192.168.200.0 255.255.255.0" push "route 192.168.200.0 255.255.255.0"
  
-client-config-dir ccd +client-config-dir /etc/openvpn/ccd 
 route 192.168.1.0 255.255.255.0  route 192.168.1.0 255.255.255.0 
  
Line 914: Line 496:
  
 Naturally replace 192.168.200.0 255.255.255.0 with the Server's Network Route, and  192.168.1.0 255.255.255.0 with the Client's Network Route. Naturally replace 192.168.200.0 255.255.255.0 with the Server's Network Route, and  192.168.1.0 255.255.255.0 with the Client's Network Route.
 +208.67.222.222 and 208.67.220.220 are the OpenDNS IPv4 DNS service addresses.
  
-208.67.222.222 and 208.67.220.220 are the OpenDNS IP addresses. Up to now the DNS push configuration has not been successful. You can either use the original Client DNS servers or else you may edit /etc/resolv.conf manually. However it is still worth trying to use the DNS servers listed by the Client, I find that they are generally still be available from the Server's Network, so you would not need to do anything.+<note warning>Up to now the DNS push configuration has not been successful.</note>
  
-Next you will have to configure some iptables NAT forwarding on the Server (only). You can do this by first flushing the iptables:+You can either use the original Client DNS servers or else you may rewrite /etc/resolv.conf manually:
  
 <code> <code>
-iptables -F+OpenDNS Servers 
 +nameserver 208.67.222.222 
 +nameserver 208.67.220.220
 </code> </code>
  
-And then:+According to your routing table however, it is still worth trying to use the DNS servers listed by the Client, I find that they are generally still available, so you would not need to do anything. However do be aware of possible DNS leaks if you are concerned about your privacy.
  
-<code> +Some users have reported that their Client'Network Manager, (or any other similar application) re-wrote the original /etc/resolv.conf back after their manual editingThis could not be reproduced by the author of this article (yet), but you may consider installing and configuring openresolv(5) if this actually happens to youA SlackBuild for openresolv may be found on http://slackbuilds.org. Openresolv is currently out of the scope of this article.
-# iptables -t nat -A POSTROUTING -10.8.0.0/24 -o eth0 -j MASQUERADE +
-</code>+
  
-On Slackware, such a line may be included in /etc/rc.d/rc.firewall and /etc/rc.d/rc.inet2 will run it each time you reboot the Server if the former has executable permissions. You do not have to include anything in /etc/rc.d/rc.local.+Next you will have to configure NAT forwarding on the Server (only).
  
-The exact lines which you need to include depend on whether you already entered your own iptables filter chains and rules, but I will assume that that this is not the case.+You can do this by means of iptables or the newer nftables (not both). 
 + 
 +==== 12.2 NAT forwarding with iptables ====
  
-As already explained, as a minimum you only need to enter the following lines in /etc/rc.d/rc.firewall+Start by flushing the ''iptables''
  
 <code> <code>
-#!/bin/sh +# /usr/sbin/iptables -F
-iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE+
 </code> </code>
  
-If on the other hand you would like a better firewall and you are at least moderately confident with iptables, I propose the following script to be included in your /etc/rc.d/rc.firewall. The comments in the script should help you understand the impact they will have on the Server.+And then:
  
 <code> <code>
-#!/bin/bash                                                                                                                                           +# /usr/sbin/iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE 
-# Start/stop/restart/status the firewall                                                                                                              +</code>
-                                                                                                                                                      +
-IPT=/usr/sbin/iptables # This will provide some portability                                                                                           +
-                                                                                                                                                      +
-firewall_start() {                                                                                                                                    +
-                                                                                                                                                      +
-  # flush the iptables                                                                                                                                +
-  echo -e "Starting the firewall ....\c"                                                                                                              +
-  $IPT -F                                                                                                                                             +
-                                                                                                                                                      +
-  # policies                                                                                                                                          +
-  $IPT -P OUTPUT DROP                                                                                                                                 +
-  $IPT -P INPUT DROP                                                                                                                                  +
-  $IPT -P FORWARD DROP +
  
-  $IPT -N SERVICES # services is custom chain +On Slackware, such line may be included in ''/etc/rc.d/rc.firewall'' and ''/etc/rc.d/rc.inet2'' will run it each time you reboot the Server if the former has executable permissions. You do not have to include anything in ''/etc/rc.d/rc.local''.
  
-  # allowed output +The exact lines which you need to include depend on whether you already entered your own iptables filter chains and rules, but I will assume that that this is not the case.
-  $IPT -A OUTPUT -o lo -j ACCEPT +
-  $IPT -A OUTPUT -o eth0 -j ACCEPT +
-  $IPT -A OUTPUT -o tun0 -j ACCEPT+
  
-  # allowed inputs  +As already explained, as minimum you only need to enter the following lines in ''/etc/rc.d/rc.firewall''
-  #$IPT -A INPUT -i lo -j ACCEPT # uncomment if the host is desktop  +
-  $IPT -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT # allow responses +
-  $IPT -A INPUT -j SERVICES # append the services chain to the input +
  
-  allowed forwarding for openVPN +<code> 
-  $IPT -A FORWARD -i eth0 -o tun0 -m state --state ESTABLISHED,RELATED -j ACCEPT +#!/bin/sh 
-  $IPT -A FORWARD -s 10.8.0.0/24 -o eth0 -j ACCEPT +iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
- +
-  # masquerade the openvpn network +
-  $IPT -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE +
- +
-  # allow sshd on the default tcp port 22 +
-  #$IPT -A SERVICES -p tcp --dport 22 -j ACCEPT # Uncomment to allow sshd +
- +
-  # allow openvpn for the non-default tcp port 443 +
-  $IPT -A SERVICES -p tcp --dport 443 -j ACCEPT +
-   +
-  echo "done." +
-}  +
- +
-firewall_stop() {  +
-  echo -e "Stopping the firewall ....\c" +
- +
-  # polcies (permissive) +
-  $IPT -P OUTPUT ACCEPT +
-  $IPT -P INPUT ACCEPT  +
-  $IPT -P FORWARD ACCEPT  +
- +
-  # flush the iptables  +
-  $IPT -F  +
- +
-  # delete the services custom chain  +
-  $IPT -X SERVICES +
-  echo "done." +
-+
- +
-firewall_status() { +
-  $IPT -vL +
-+
- +
-case "$1" in  +
-'start')  +
-  firewall_start  +
-  ;;  +
-'stop')  +
-  firewall_stop  +
-  ;;  +
-'restart')  +
-  firewall_stop  +
-  firewall_start  +
-  ;;  +
-'status'+
-  firewall_status +
-  ;; +
-*)  +
-  echo "Usage $0 start|stop|restart|status"  +
-esac+
 </code> </code>
  
-Give the firewall rc script executable permission:+Give the firewall ''rc'' script executable permission:
  
 <code> <code>
Line 1038: Line 553:
 </code> </code>
  
-Restart the Openvpn service on the Server:+Restart the OpenVPN service on the Server:
  
 <code> <code>
Line 1050: Line 565:
 </code> </code>
  
-===== 11Firewalls =====+==== 12.3 NAT forwarding with nftables ====
  
-In the previous chapter we referred to a firewall you may include to protect your Openvpn Server.  However this chapter refers to firewalls on the Client LAN that may block the VPN connection by blocking traffic on UDP port 1194.+If you prefer ''nftables'', these are the commands you can use:
  
-In order to penetrate through the Client firewall your may want to try changing the port to 443 - normally reserved for https. Using TCP instead of UDP will also help. To make these change you will need to amend /etc/openvpn/server.conf of the Server, from+<code> 
 +/usr/sbin/nft flush ruleset 
 +/usr/sbin/nft add table nat 
 +/usr/sbin/nft 'add chain nat postrouting { type nat hook postrouting priority 100 ; }' 
 +/usr/sbin/nft add rule nat postrouting ip saddr 10.8.0.0/24 oif eth0 masquerade 
 +</code> 
 + 
 +===== 13. Firewalls ===== 
 + 
 +You may find that on some networks, UDP port 1194 is blocked, and so the Client will be unable to connect. In order to penetrate through the firewall you may want to try changing the port to 443 - normally reserved for https. Using TCP instead of UDP will also help. To make these change you will need to amend /etc/openvpn/server.conf of the Server, from
  
 <code> <code>
Line 1068: Line 592:
 </code> </code>
  
-and /etc/openvpn/client.conf of the Client, from+Also, comment out ''explicit-exit-notify 1'' in ''/etc/openvpn/server.conf'' 
 + 
 +You also have to modify your Router's port forwarding to TCP port 443. 
 + 
 +Edit ''/etc/openvpn/client.conf'' of the Client, from
  
 <code> <code>
Line 1084: Line 612:
 </code> </code>
  
-The Server's firewall script would also need to be modified. Change these lines: +===== 14. Sources =====
- +
-<code> +
-# allow vpn on the default udp port 1194  +
-$IPT -A SERVICES -p udp --dport 1194 -j ACCEPT  +
-</code> +
- +
-to: +
- +
-<code> +
-# allow vpn on the custom tcp port 443  +
-$IPT -A SERVICES -p tcp --dport 443 -j ACCEPT  +
-</code> +
- +
-You also have to modify your Router's port forwarding to TCP port 443. +
- +
-===== 12. Sources =====+
    
 (1) http://en.wikipedia.org/wiki/OpenVPN (1) http://en.wikipedia.org/wiki/OpenVPN
Line 1108: Line 620:
 (3) http://slackwiki.com/OpenVPN_smcr_2012 (3) http://slackwiki.com/OpenVPN_smcr_2012
  
-(4) http://www.no-ip.com+(4) http://www.duckdns.org
  
 +(5) http://roy.marples.name/projects/openresolv/index
 +
 +(6) https://gist.github.com/adaRn/337838d87cd8f544407d6446cf7daa80
 +
 +  * Written for Slackware 15.0 in April 2022
   * Originally written by [[wiki:user:chrisabela | Chris Abela]]   * Originally written by [[wiki:user:chrisabela | Chris Abela]]
 <!-- Please do not modify anything below, except adding new tags.--> <!-- Please do not modify anything below, except adding new tags.-->
 {{tag>howtos network openvpn}} {{tag>howtos network openvpn}}
- 
 howtos:network_services:openvpn ()