Welcome to the Slackware Documentation Project


This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
howtos:hardware:audio_and_snd-hda-intel [2014/08/10 02:37 (UTC)]
allend [Diagnosing the issue] - Added check for multiple sound devices
howtos:hardware:audio_and_snd-hda-intel [2014/08/10 03:04 (UTC)] (current)
allend [The fix] - Added multiple sound devices paragraph
Line 31: Line 31:
 It is probably easiest just to reboot at this stage to check if it works right. It is probably easiest just to reboot at this stage to check if it works right.
 +If you have multiple sound devices, then you can specify the index values that are to be assigned to each device, where index=0 is the default. For example, if <​code>​aplay -l
 +**** List of PLAYBACK Hardware Devices ****
 +card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
 +  Subdevices: 1/1
 +  Subdevice #0: subdevice #0
 +card 1: Generic_1 [HD-Audio Generic], device 0: CX20756 Analog [CX20756 Analog]
 +  Subdevices: 1/1
 +  Subdevice #0: subdevice #​0</​code>​ then you could assign card 1 to index=0 with /​etc/​modprobe.d/​snd-hda-intel.conf containing <​code>​alias char-major-116 snd
 +alias snd-card-0 snd-hda-intel
 +alias snd-card-1 snd-hda-intel
 +options snd-hda-intel id=Generic_1 index=0
 +options snd-hda-intel id=Generic index=1</​code>​
 =====How to find the right options?​===== =====How to find the right options?​=====

In Other Languages
QR Code
QR Code howtos:hardware:audio_and_snd-hda-intel (generated for current page)