Welcome to the Slackware Documentation Project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
howtos:hardware:arm:raspberrypi3_wap [2018/08/28 20:07 (UTC)]
bifferos [Introduction]
howtos:hardware:arm:raspberrypi3_wap [2018/08/28 20:08 (UTC)] (current)
bifferos [Introduction]
Line 5: Line 5:
 This HOWTO shows you how to replace the WiFi element of your home network setup with a Raspberry Pi running Slackware. ​ Other HOWTOs explain how to setup DHCP and so on for your wireless devices, but this tries to keep things really simple and just give you an ethernet->​Wifi bridge. ​ This is very close to the config I ended up with when I configured a TP-LINK ADSL router to do the same thing, only this way I get to patch stuff a lot more easily. This HOWTO shows you how to replace the WiFi element of your home network setup with a Raspberry Pi running Slackware. ​ Other HOWTOs explain how to setup DHCP and so on for your wireless devices, but this tries to keep things really simple and just give you an ethernet->​Wifi bridge. ​ This is very close to the config I ended up with when I configured a TP-LINK ADSL router to do the same thing, only this way I get to patch stuff a lot more easily.
  
-Although I'​ve ​tested ​this HOWTO on a RPi 3, I've since tried it on an RPi2 as well and it works just as well.  Interface wlan1 will obviously change to wlan0 because the Pi2 has no on-board WiFi.+Although I'​ve ​originally written ​this HOWTO for a RPi 3, I've since tried it on an RPi2 and it works just as well.  Interface wlan1 will obviously change to wlan0 because the Pi2 has no on-board WiFi however.
 ===== Hardware Requirements ===== ===== Hardware Requirements =====
  

In Other Languages
QR Code
QR Code howtos:hardware:arm:raspberrypi3_wap (generated for current page)