Differences

This shows you the differences between two versions of the page.

--- howtos:hardware:arm:raspberrypi3_wap [2018/08/28 20:07 (UTC)]
bifferos [Introduction]
+++ howtos:hardware:arm:raspberrypi3_wap [2018/08/28 20:08 (UTC)] (current)
bifferos [Introduction]
@@ Line 5: / Line 5: @@
 This HOWTO shows you how to replace the WiFi element of your home network setup with a Raspberry Pi running Slackware.  Other HOWTOs explain how to setup DHCP and so on for your wireless devices, but this tries to keep things really simple and just give you an ethernet->Wifi bridge.  This is very close to the config I ended up with when I configured a TP-LINK ADSL router to do the same thing, only this way I get to patch stuff a lot more easily.
-Although I've tested this HOWTO on a RPi 3, I've since tried it on an RPi2 as well and it works just as well.  Interface wlan1 will obviously change to wlan0 because the Pi2 has no on-board WiFi.
+Although I've originally written this HOWTO for a RPi 3, I've since tried it on an RPi2 and it works just as well.  Interface wlan1 will obviously change to wlan0 because the Pi2 has no on-board WiFi however.
 ===== Hardware Requirements =====