[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.

Welcome to the Slackware Documentation Project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
howtos:hardware:arm:raspberrypi3_network [2018/08/26 10:27 (UTC)] – [Final configuration] bifferoshowtos:hardware:arm:raspberrypi3_network [2024/03/11 10:33 (UTC)] (current) – avoid saving the host key for the installer in the first place j12i
Line 35: Line 35:
 In this case the IP address of the Pi is 172.17.0.71. In this case the IP address of the Pi is 172.17.0.71.
  
-ssh into the Pi as root:+ssh into the Pi as root 
 +(disabling strict host key checking because the host key will change inevitably after installation):
  
-<code># ssh root@172.17.0.71</code>+<code># ssh -o StrictHostKeyChecking=no root@172.17.0.71</code>
  
 Press <enter> for password. Press <enter> for password.
Line 86: Line 87:
 <code># mount /dev/mmcblk0p1 /mnt/boot</code> <code># mount /dev/mmcblk0p1 /mnt/boot</code>
  
-Remove the ramdisk:+To free up some space, remove the ramdisk image:
  
-<code># rm /mnt/boot/config.gz</code>+<code># rm /mnt/boot/initrd.gz </code>
  
-Assuming your rootfs is mounted at /mnt, install extra packages:+Now, assuming your rootfs is mounted at /mnt, and boot partion at /mnt/boot install extra packages:
  
 <code># ROOT=/mnt installpkg /rpi-extra/kernel* /rpi-extra/sarpi*</code> <code># ROOT=/mnt installpkg /rpi-extra/kernel* /rpi-extra/sarpi*</code>
Line 107: Line 108:
 <code># chmod 755 /etc/rc.d/rc.ntpd <code># chmod 755 /etc/rc.d/rc.ntpd
 # /etc/rc.d/rc.ntpd start</code> # /etc/rc.d/rc.ntpd start</code>
- 
-Note that the RPi ssh identity has now changed from the one used for the installer, so when you ssh to your newly installed Slackware box you will have to remove the entry from .ssh/known_hosts on your ssh client. 
 ====== Sources ====== ====== Sources ======
-  * Originally written by [[wiki:user:bifferos | User bifferos]]+  * Much information taken from the [[http://sarpi.co.uk | SARPi website]] 
 +  * Page written by [[wiki:user:bifferos | User bifferos]]
  
 {{tag>howtos RPi raspberry arm author_bifferos}} {{tag>howtos RPi raspberry arm author_bifferos}}
 howtos:hardware:arm:raspberrypi3_network ()