Welcome to the Slackware Documentation Project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
howtos:hardware:arm:olinuxinoa10s [2013/11/12 10:09 (UTC)]
balky [Compiling the kernel (Copied from http://olimex.wordpress.com/2013/06/19/building-linux-for-a10s-from-scratch/ and http://olimex.wordpress.com/2013/10/28/building-debian-sd-card-for-linux-with-kernel-3-4-from-scratch-for-a10s-olinuxino-micro/ with some m
howtos:hardware:arm:olinuxinoa10s [2013/11/15 01:26 (UTC)]
balky [Compiling the kernel (Copied from http://olimex.wordpress.com/2013/06/19/building-linux-for-a10s-from-scratch/ and http://olimex.wordpress.com/2013/10/28/building-debian-sd-card-for-linux-with-kernel-3-4-from-scratch-for-a10s-olinuxino-micro/ with some m
Line 47: Line 47:
 <​code>#​ make ARCH=arm menuconfig</​code>​ <​code>#​ make ARCH=arm menuconfig</​code>​
     * HINT: If you're having problems with Logitech wireless keyboards and mice, don't build the following (for Linux 3.4.61):     * HINT: If you're having problems with Logitech wireless keyboards and mice, don't build the following (for Linux 3.4.61):
-      * Under Kernel Configuration,​ this must be built in the kernel: 
         * Device Drivers->​HID Devices->​Special HID drivers-><​ > Logitech Unifying receivers full support         * Device Drivers->​HID Devices->​Special HID drivers-><​ > Logitech Unifying receivers full support
     * HINT: To verify OTG is enabled(for Linux 3.4.61):     * HINT: To verify OTG is enabled(for Linux 3.4.61):

In Other Languages
QR Code
QR Code howtos:hardware:arm:olinuxinoa10s (generated for current page)