[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.
Welcome to the Slackware Documentation Project
Diferencias
Muestra las diferencias entre dos versiones de la página.
Ambos lados, revisión anteriorRevisión previaPróxima revisión | Revisión previaPróxima revisiónAmbos lados, revisión siguiente |
es:howtos:network_services:tinc [2019/02/23 21:44 (UTC)] – [Configuración] rramp | es:howtos:network_services:tinc [2019/02/24 14:31 (UTC)] – rramp |
---|
<del> * In tinc.conf, omit Interface directive, because Tinc daemon will then automatically select TUN/TAP device and directive may do more harm than good. Especially if Tinc service starts and fails immediately, check that Interface is not set. | <del> * In tinc.conf, omit Interface directive, because Tinc daemon will then automatically select TUN/TAP device and directive may do more harm than good. Especially if Tinc service starts and fails immediately, check that Interface is not set. |
</del> | </del> |
* Tinc-up script is not used on Windows. You created persistent TUN/TAP device during installation (did you?) and now only manually configure IP (run ncpa.cpl, see properties of device and so on). This can be also scripted with command such as: | * La secuencia de comandos (script) //Tinc-up// no es utilizado sobre Windows. Usted creo un dispositivo TUN/TAP persistente durante la instalación (¿lo hizo?) y ahora solo configuré manualmente la IP (ejecute ncpa.cpl), vea las propiedades del dispositivo, etc).Esto también puede ser automatizado con una secuencia de comandos como por ejemplo: |
| <del> * Tinc-up script is not used on Windows. You created persistent TUN/TAP device during installation (did you?) and now only manually configure IP (run ncpa.cpl, see properties of device and so on). This can be also scripted with command such as: |
| </del> |
<code> | <code> |
netsh interface ip set address name="Local Area Connection number" static <IP address> <mask> | netsh interface ip set address name="Local Area Connection number" static <IP address> <mask> |