[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.

Welcome to the Slackware Documentation Project

Diferencias

Muestra las diferencias entre dos versiones de la página.

Enlace a la vista de comparación

Ambos lados, revisión anteriorRevisión previa
Próxima revisión
Revisión previa
es:howtos:network_services:slackware_print_server [2019/02/17 13:44 (UTC)] – [Configuración de la impresora en el servidor de impresión] slackwarespanoles:howtos:network_services:slackware_print_server [2019/02/17 14:02 (UTC)] (actual) slackwarespanol
Línea 1: Línea 1:
-<note warning>En proceso. Victor</note> 
 <!-- Add your text below. We strongly advise to start with a Headline (see button bar above). --> <!-- Add your text below. We strongly advise to start with a Headline (see button bar above). -->
 ====== Configuración de un servidor de impresión para uso doméstico fuera de cualquier hardware antiguo con Slackware ====== ====== Configuración de un servidor de impresión para uso doméstico fuera de cualquier hardware antiguo con Slackware ======
Línea 69: Línea 68:
  
 Algunas plataformas de hardware no le dejan ninguna manera de hacer un cierre limpio sin interactuar con el sistema operativo que se ejecuta en él (como el antiguo AT PC o seagate dockstar). Puede solucionar este problema haciendo una regla de udev que ejecute un apagado cuando se retira la impresora (desenchufada o apagada) para que cuando termine de imprimir, apague la impresora, el servidor de impresión también se apagaría sin fallar. Algunas plataformas de hardware no le dejan ninguna manera de hacer un cierre limpio sin interactuar con el sistema operativo que se ejecuta en él (como el antiguo AT PC o seagate dockstar). Puede solucionar este problema haciendo una regla de udev que ejecute un apagado cuando se retira la impresora (desenchufada o apagada) para que cuando termine de imprimir, apague la impresora, el servidor de impresión también se apagaría sin fallar.
-===== Setting up the printer on the print clients  ===== +===== Configuración de la impresora en los clientes de impresión ===== 
-Now go on the PC's where you want to access the printer and configure an ipp remote printer with the correct driver for the printer+Ahora vaya a la PC donde desea acceder a la impresora y configure una impresora remota ipp con el controlador correcto para la impresora
-The /etc/cups/printers.conf should have an entry similar to this:+El /etc/cups/printers.conf debe tener una entrada similar a esta:
  
   <Printer test>   <Printer test>
Línea 93: Línea 92:
   </Printer>   </Printer>
  
-You may now try printing a test page on the client PC.+Ahora puede intentar imprimir una página de prueba en la PC cliente.
  
-===== Making the printserver crash proof  ===== +===== Hacer que el servidor de impresión se bloquee a prueba ===== 
-Once you have your print server working right you will probably want avoid doing anything to it unless it's really necessaryLooking after it's shutting down right and resolving fsck issues on reboot should not be something to worry about but journaled filesystems are meant to deal with accidental power rages not really for you to crash the system every time you switch it off+Una vez que tenga su servidor de impresión funcionando correctamente, probablemente querrá evitar hacerle nada a menos que sea realmente necesario.Cuidar de que se apague correctamente y resolver los problemas de fsck en el reinicio no debería ser algo de lo que preocuparse, pero los sistemas de archivos registrados están diseñados para hacer frente a las cortes de energía accidentales, no realmente para que bloquee el sistema cada vez que lo apague. 
 +Tener el sistema de archivos raíz montado solo para lectura, con solo las partes necesarias para escribir vinculadas en tmpfs, nos liberaría de tener que preocuparnos por apagar el servidor de impresión.
  
-Having the root filesystem mounted read only, with only the parts that are necessary for writing linked into  tmpfs, would free us form having to worry about powering down the print server. +Así es como modifiqué rc.S rc.M para el trabajo:
- +
-This is how I modified rc.S and rc.M for the job:+
  
  
Línea 204: Línea 202:
    # Screen blanks after 15 minutes idle time, and powers down in one hour    # Screen blanks after 15 minutes idle time, and powers down in one hour
  
-A bit of tinkering with links in var and a few other places and you're done.+Un poco de retoques con enlaces en var y en algunos otros lugares y ya está.
  
   root@printserver:~# ls -l /var/   root@printserver:~# ls -l /var/
Línea 259: Línea 257:
   root@printserver:~#   root@printserver:~#
      
-With these links the Slackware distribution will operate pretty much normally and can resume to ordinary operation by just remounting root read/write "mount -o remount,rw /" to allow some maintenance (like package managementand when that's done just remount it ro with a simple "mount -o remount,ro /".+Con estos enlaces, la distribución de Slackware funcionará de manera bastante normal y podrá reanudar la operación normal simplemente volviendo a montar la lectura/escritura de la raíz  "mount -o remount, rw /" para permitir cierto mantenimiento (como la gestión de paquetesy cuando se hace, simplemente vuelva montarlo "solo lectura" con un simple "mount -o remount,ro /". 
 + 
 +===== Aquí está mi servidor de impresión wifi ===== 
 +Aquí está uno de mis Dockstars en una carcasa casera que ejecuta el servidor de impresión descrito anteriormente desde el flash interno. (la memoria USB en la parte superior es una tarjeta wifi)
  
-===== Here's my wifi print server  ===== 
-Here's one of my Dockstars in a homebrew casing running the above described printserver from internal flash. (the usb stick on top is a wifi stick) 
 {{http://i246.photobucket.com/albums/gg113/louigi600/ARM/printesver_zps79e33939.jpg}} {{http://i246.photobucket.com/albums/gg113/louigi600/ARM/printesver_zps79e33939.jpg}}
  
-====== Sources ======+====== Fuentes ======
 <!-- If you are copying information from another source, then specify that source --> <!-- If you are copying information from another source, then specify that source -->
 <!-- * Original source: [[http://some.website.org/some/page.html]] --> <!-- * Original source: [[http://some.website.org/some/page.html]] -->
 <!-- Authors are allowed to give credit to themselves! --> <!-- Authors are allowed to give credit to themselves! -->
 <!-- * Originally written by [[wiki:user:louigi600 | User X]] --> <!-- * Originally written by [[wiki:user:louigi600 | User X]] -->
-  * Originally written by [[wiki:user:louigi600|louigi600]]+  * Escrito originalmente por [[wiki:user:louigi600|louigi600]] 
 +  * Traducido por:  [[wiki:user: slackwarespanol | Victor]]  2019/02/17 14:01 (UTC)
 <!-- * Contributions by [[wiki:user:yyy | User Y]] --> <!-- * Contributions by [[wiki:user:yyy | User Y]] -->
  
 es:howtos:network_services:slackware_print_server ()