[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.

Welcome to the Slackware Documentation Project

Diferencias

Muestra las diferencias entre dos versiones de la página.

Enlace a la vista de comparación

Ambos lados, revisión anteriorRevisión previa
Próxima revisión
Revisión previa
Próxima revisiónAmbos lados, revisión siguiente
es:howtos:network_services:configuring_a_wireless_access_point [2019/02/12 12:40 (UTC)] – [Configuring a Wireless Access Point] slackwarespanoles:howtos:network_services:configuring_a_wireless_access_point [2019/02/12 19:16 (UTC)] – [IP_forwarding and routing] slackwarespanol
Línea 9: Línea 9:
 Esta es una configuración muy limitada, se puede ampliar con DHCP, DNS y un firewall, pero estos temas se pueden encontrar en otros Howtos aquí en SlackDocs. Esta es una configuración muy limitada, se puede ampliar con DHCP, DNS y un firewall, pero estos temas se pueden encontrar en otros Howtos aquí en SlackDocs.
  
-===== Requirements =====+===== Requisitos =====
  
-The package hostapd is available at [[http://www.slackbuilds.org|slackbuilds.org]]. It provides a daemon who listens on the wireless interface and allows the clients to authenticate+El paquete hostapd está disponible en [[http: //www.slackbuilds.org | slackbuilds.org]]. Proporciona un demonio que escucha en la interfaz inalámbrica y permite que los clientes se autentiquen. 
 +===== Configurando hostapd =====
  
-===== Configuring hostapd ===== +La configuración de hostapd se realiza en el archivo /etc/hostapd/hostapd.conf, aquí un ejemplo
- +
-The configuration of hostapd is done in the file /etc/hostapd/hostapd.conf, here an example+
 <code> <code>
 # the wireless interface  # the wireless interface 
Línea 52: Línea 51:
 wpa_pairwise=TKIP  wpa_pairwise=TKIP 
 rsn_pairwise=CCMP rsn_pairwise=CCMP
-</code>Be sure to read the manpage for hostapd+</code>Asegúrese de leer la página del manual de hostapd
 ===== Configuring the client ===== ===== Configuring the client =====
  
Línea 59: Línea 58:
 subnetmask: 255.255.255.0 subnetmask: 255.255.255.0
 gateway: 192.168.45.1</code> gateway: 192.168.45.1</code>
-Since we have (in this minimal configuration) no DNS-server running in our networkyou'll have to configure your client with the same DNS-server that your Accesspoint is using (look at /etc/resolv.conf).+Como no tenemos un servidor DNS (en esta configuración mínima) en nuestra redtendrá que configurar su cliente con el mismo servidor DNS que utiliza su punto de acceso (consulte /etc/resolv.conf).
 ===== IP_forwarding and routing ===== ===== IP_forwarding and routing =====
  
-=== Enable IP forwarding ===+=== Habilitar el reenvío de IP ===
  
 <code>echo "1" > /proc/sys/net/ipv4/ip_forward</code> <code>echo "1" > /proc/sys/net/ipv4/ip_forward</code>
  
-=== Internet Connection Sharing ===+=== Conexión compartida a Internet ===
  
 <code>iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE</code> <code>iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE</code>
-In this case eth0 is the interface which is connected to the internet. If your computer has connection via ppp you shouls use ppp0 instead of eth0.+En este caso, eth0 es la interfaz que está conectada a internet. Si su computadora tiene una conexión través de ppp, deberá usar ppp0 en lugar de eth0.
  
 ===== Starting the Accesspoint ===== ===== Starting the Accesspoint =====
 es:howtos:network_services:configuring_a_wireless_access_point ()