[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.

Welcome to the Slackware Documentation Project

Diferencias

Muestra las diferencias entre dos versiones de la página.

Enlace a la vista de comparación

Ambos lados, revisión anteriorRevisión previa
Próxima revisión		Revisión previa
Próxima revisiónAmbos lados, revisión siguiente
es:howtos:hardware:arm:qemu_support_in_slackware_arm [2019/09/01 21:23 (UTC)] – [Configuración de red para QEMU] rrampes:howtos:hardware:arm:qemu_support_in_slackware_arm [2019/09/01 21:38 (UTC)] – [QEMU NAT Mode Networking] rramp
Línea 190: Línea 190:
 Run this command for each network interface actively used by QEMU. Run this command for each network interface actively used by QEMU.
 </note> </note>
-==== QEMU NAT Mode Networking ==== +==== Modo de red NAT para QEMU ==== 
-NAT mode does not require any additional configuration on the Slackware x86 host machine or in the QEMU guest machine.  Here is a shortened example of a QEMU guest being launched with NAT mode networking:+El modo NAT no requiere una configuración adicional sobre una máquina Slackware x86 o en la máquina invitada QEMU. 
 +Aquí hay un ejemplo abreviado de un invitado de QEMU que está siendo lanzado con el modo de red NAT:
 <code> <code>
 # cd /export/armhost # cd /export/armhost
Línea 206: Línea 207:
  
 With NAT mode enabled, QEMU launches a virtual network of 10.0.2.0/24.  The QEMU guest will be assigned the IP address 10.0.2.15.  The guest can access the Slackware x86 host at 10.0.2.2 and the QEMU DNS server runs at 10.0.2.3.  QEMU does not have direct access to the host's Local Area Network.  This means that the QEMU guest isn't assigned a physical IP address by your router DHCP service.  You will not be able to ping the QEMU guest from the host machine but the guest should be able to ping the host machine at 10.0.2.2.  The QEMU guest should be able to access the internet and communicate with the host machine. With NAT mode enabled, QEMU launches a virtual network of 10.0.2.0/24.  The QEMU guest will be assigned the IP address 10.0.2.15.  The guest can access the Slackware x86 host at 10.0.2.2 and the QEMU DNS server runs at 10.0.2.3.  QEMU does not have direct access to the host's Local Area Network.  This means that the QEMU guest isn't assigned a physical IP address by your router DHCP service.  You will not be able to ping the QEMU guest from the host machine but the guest should be able to ping the host machine at 10.0.2.2.  The QEMU guest should be able to access the internet and communicate with the host machine.
-==== QEMU Bridged Mode Networking ====+==== Modo de red puente para QEMU ====
  
 The best way to set up a bridged network interface for QEMU is with the provided helper script, rc.local-additions.  If you choose to take this route, you need to disable the NetworkManager service.  NetworkManager comes with Slackware, but it is not developed by Slackware.  As a result, the process of configuring a bridge with NetworkManager is not supported in this guide. The best way to set up a bridged network interface for QEMU is with the provided helper script, rc.local-additions.  If you choose to take this route, you need to disable the NetworkManager service.  NetworkManager comes with Slackware, but it is not developed by Slackware.  As a result, the process of configuring a bridge with NetworkManager is not supported in this guide.

Traza:

es:howtos:hardware:arm:qemu_support_in_slackware_arm ()