[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.

Welcome to the Slackware Documentation Project

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
howtos:slackware_admin:slackware-arubacloud [2018/02/13 19:31 (UTC)] – draft 2 andrixnethowtos:slackware_admin:slackware-arubacloud [2020/05/17 22:07 (UTC)] (current) – [Importing Slackware VM image into ArubaCloud] andrixnet
Line 2: Line 2:
 ====== Install Slackware on a CloudVPS by ArubaCloud ====== ====== Install Slackware on a CloudVPS by ArubaCloud ======
  
-ArubaCloud offers excellent low-cost VPS services, starting at 1 € / month //(at least when this article was created, feb. 2018, see ArubaCloud limitations)//.  +ArubaCloud offers excellent low-cost VPS services, starting at 2.79 € / month //(updated May 2020; was 1€/month in feb. 2018, see ArubaCloud offers and limitations)//.  
-This article refers to installing Slackware on [[https://www.arubacloud.com/vps/virtual-private-server-range.aspx | CloudVPS]] hosting service, which is based on VMware virtualization hypervisor and uses several OS templates, Slackware not being among them.<del> As a low-cost service, custom OS installation, management with VMware Client are not available.</del> +This article refers to installing Slackware on [[https://www.arubacloud.com/vps/virtual-private-server-range.aspx | CloudVPS]] hosting service, which is based on VMware virtualization hypervisor and uses several OS templates, Slackware not being among them. //As a low-cost service, custom OS installation, management with VMware Client are not available.//
-You can request a free trial [[https://www.arubacloud.com/free-trial.aspx| here]].+
  
-//**This guide does not cover Cloud Pro or other services by ArubaCloud.**//+//**This guide does not cover Cloud Pro or other services by ArubaCloud**//, as these services may offer additional tools that make this guide unnecessary. Alternately, this guide may be used for other similar services.
  
 ===== Prerequisites ===== ===== Prerequisites =====
Line 22: Line 21:
   - load credit into your account (free trial voucher or purchase credit)   - load credit into your account (free trial voucher or purchase credit)
   - create VPS based on predefined OS template   - create VPS based on predefined OS template
-This guide has been written using an **Ubuntu 14.04 LTS** template. +This guide has been written using an **Ubuntu Server 16.04 LTS 64bit** template.  
 +(//updated May 2020//)
  
 ===== Information gathering ===== ===== Information gathering =====
Line 51: Line 51:
  
 ===== Export an image of the Aruba created server ===== ===== Export an image of the Aruba created server =====
 +
 +<note important>This step is optional. It will familiarize you with the transfer operation, will test your connection and FTP account storage, but it is not required. 
 +
 +Perform it if you want to play at home with the Aruba generated server</note>
  
 <note>Aruba has predefined OS installations as templates, and such a template is deployed into your VPS upon creation. It is personalized with IP address, hostname and you are given an automatically generated password.</note> <note>Aruba has predefined OS installations as templates, and such a template is deployed into your VPS upon creation. It is personalized with IP address, hostname and you are given an automatically generated password.</note>
Line 62: Line 66:
 <note warning>Make sure the process finishes without error before proceeding!</note> <note warning>Make sure the process finishes without error before proceeding!</note>
  
-You can use this image to make tests on your local VMware Player, and also as a test for the FTP transfer.+You can use this image to make tests on your local VMware Player, and also as a test for the FTP transfer. You need either a Linux Live CD or a running virtual machine with an installed Linux that includes **//ncftp//** package and a separate virtual HDD to fill with the image.
  
 ===== Slackware virtual machine ==== ===== Slackware virtual machine ====
Line 88: Line 92:
  
 <note tip>For example, you could use a single partition for both system and data, and a small partition (ie. 1-4GB) for swap. Or you could use about a partition for the system, a partition for swap, a partition for data. //Your choice//.</note> <note tip>For example, you could use a single partition for both system and data, and a small partition (ie. 1-4GB) for swap. Or you could use about a partition for the system, a partition for swap, a partition for data. //Your choice//.</note>
 +
 +<note tip>For a server installation you might want to skip KDE, T, TCL, X, XAP, XFCE package series</note>
 +
 +<note tip>After you finish your installation I strongly recommend you add your SSH public key for the root user for remote access. Follow this [[howtos:security:sshkeys|How to use SSH keys to connect without a password.]] Either use the Virtual Machine's console, or ssh from your local machine to do it. Note: you may want to temporarily allow root login via SSH into the Virtual Machine, but remember to restore the default config afterwards.</note>
  
 <note>You are running locally, with the machine behind a NAT router (done by VMware Player) with regards to the internet. You have connectivity, but it is different then the one you'll have at Aruba.  <note>You are running locally, with the machine behind a NAT router (done by VMware Player) with regards to the internet. You have connectivity, but it is different then the one you'll have at Aruba. 
Line 94: Line 102:
  
 After the first start of your fresh Slackware installation, you should set up **[[slackware:slackpkg|slackpkg]]** and perform an update. After the first start of your fresh Slackware installation, you should set up **[[slackware:slackpkg|slackpkg]]** and perform an update.
 +
 +I'll leave additional software for later, to minimize the data transfer.
  
 ===== Exporting Slackware VM image ===== ===== Exporting Slackware VM image =====
  
 +Make sure you have enough free space in your FTP account. This will take up several GB of data.
  
 +**In your Slackware virtual machine:**
  
 +  * Stop all unneccesary services (inetd,sendmail,saslauthd,ntpd,httpd,sshd,syslog, etc)
 +  * Optimize disk by overwriting all free space with zeros (helps with compression, //the resulting image, as described here will be about 1.5GB//):
 +<code>dd if=/dev/zero of=/ZERO bs=1M; rm /ZERO</code>
  
 +  * Export disk image
 +<code>cat /dev/sda | bzip2 | ncftpput -u USERNAME -p PASSWORD -c FTP_SERVER_ADDRESS /path/to/aruba_slack_image_file.bz2</code>
 +
 +<note tip>This may take a while, even hours, depending on the available bandwidth between your computer and the FTP server.</note> 
 +
 +//It is a rather dirty trick, but it works.// 
 +
 +<note warning>Make sure the process finishes without error before proceeding!</note>
 +
 +===== Importing Slackware VM image into ArubaCloud =====
 +
 +With the above step completed without error, you can proceed to inject the image into the ArubaCloud VPS. 
 +
 +  * Log in to your ArubaCloud Control Panel.
 +  * Go to "Cloud servers" -> Management
 +  * If your VPS is turned off, turn it on and wait until startup is completed (see progress indicator)
 +  * Under "Actions", select "Manage -> Sign in"
 +  * Open the recovery console. You'll get to see your server's console.
 +  * log in to your server, as root
 +  * __ALTERNATELY you could ssh into it. Also use this method if you encounter problems with recovery console key-mappings.__
 +  * check running processes and stop any unnecessary daemons (cron, acpid, atd, fail2ban, rsyslog, open-vm-tools)
 +  * **you must also disable swap memory.**
 +  * run the following command: 
 +
 +<code>ncftpget -u USERNAME -p PASSWORD -c FTP_SERVER_ADDRESS /path/to/aruba_slack_image_file.bz2 | bzip2 -d > /dev/sda</code>
 +<note tip>This may take a while, even hours, depending on the available bandwidth between Aruba's datacenter and your FTP server. At the end of the transfer, ncftpget will report the number of bytes transfered and speed. Make sure "bytes transfered" is exactly equal to the size of the compressed image (see your FTP account). You may get a "Segmentation fault" after the end of the transfer. This is acceptable and expectable.</note> 
 +
 +<note warning>Make sure the process finishes without any other errors before proceeding!</note>
 +
 +**IMMEDIATELY after it finished successfully:** 
 +  * Go to "Cloud servers" -> Management
 +  * Under "Actions", select "Manage -> Force switch off"
 +<note warning>Very important: just "switch off" will try to perform a normal shutdown procedure, which won't work properly and might even damage the disk data you injected.</note>
 +
 +Start your Slackware ArubaCloud server:
 +  * Go to "Cloud servers" -> Management
 +  * Under "Actions", select "Manage -> Switch on"
 +  * wait for it to start (//if it takes apparently too long reload the page. Apparently sometimes the UI doesn't update adequately//)
 +  * Under "Actions", select "Manage -> Sign in"
 +  * Open the recovery console. You'll get to see your server's console.
 +  * log in to your server, as root
 +  * run netconfig to set up the network according to ArubaCloud IP settings (//your wrote them down earlier//)
 +  * just to make sure everything works properly, reboot your machine.
 +  * restart the recovery console after reboot
 +  * check that everything is ok
 +  * check that you can log in remotely
 +<note important>Slackware default configuration won't allow remote root login without SSH key, so take the appropriate steps to ensure your remote access.</note>
 +
 +**Now you have a running Slackware64-14.2 in an ArubaClould VPS.**
 +
 +===== Additional configuration =====
 +
 +Since it runs under VMware hypervisor, it is useful to have the VMware-tools installed. I recommend you install the open-source version from Slackbuilds: [[https://slackbuilds.org/repository/14.2/system/open-vm-tools/?search=open-vm|open-vm-tools]].
 +
 +After your install the package and start the tools, you can verify that it works properly by:
 +  * Go to "Cloud servers" -> Management
 +  * Under "Actions", select "Manage -> Switch off"
 +
 +This is the normal shutdown procedure initiated at the request of the hypervisor, received by open-vm-tools and performed in the guest OS to obtain a clean system shutdown. 
 +
 +The "Force switch off" is equivalent to pressing the power button on a physical computer.
 +
 +**Enjoy your Slackware VPS!**
  
 ====== References ====== ====== References ======
-* [[https://www.arubacloud.com/ | ArubaCloud]] by Aruba S.p.A. (IT) - cloud services provider.+ 
 +  * [[https://www.arubacloud.com/ | ArubaCloud]] by Aruba S.p.A. (IT) - cloud services provider. 
 +  * [[https://slackbuilds.org/repository/14.2/system/open-vm-tools/?search=open-vm|open-vm-tools]] from Slackbuilds.org
  
 ====== Sources ====== ====== Sources ======
Line 109: Line 189:
  
 <!-- Authors are allowed to give credit to themselves! --> <!-- Authors are allowed to give credit to themselves! -->
-* Originally written by [[wiki:user:andrixnet| Andrei B.]] +  * Originally written by [[wiki:user:andrixnet| Andrei B.]] 
 <!-- * Contributions by [[wiki:user:yyy | User Y]] --> <!-- * Contributions by [[wiki:user:yyy | User Y]] -->
  

Trace:

howtos:slackware_admin:slackware-arubacloud ()