[2024-feb-29] Sad news: Eric Layton aka Nocturnal Slacker aka vtel57 passed away on Feb 26th, shortly after hospitalization. He was one of our Wiki's most prominent admins. He will be missed.

Welcome to the Slackware Documentation Project

This is an old revision of the document!


What is SMART ?

SMART/S.M.A.R.T stands for Self-Monitoring, Analysis and Reporting Technology. It is basically a system that collects information about a hard disk drive (HDD) and solid state drive (SDD), and allows you to run some tests on the drive to determine its approximate health.

It is important to note that SMART is far from perfect. Although a failed “Pre-fail” SMART attribute predicts failure, having no failed attributes does NOT mean the drive is not failing. The drive can be failing with above threshold attributes. This leads us to the next section backing up your data.

Backing up your data

According to CERT you should follow the 3-2-1 rule:

3 - Keep 3 copies of any important file: 1 primary and 2 backups.
2 - Keep files on 2 different media types to protect against different types of hazards.
1 - Store 1 copy offsite (e.g. outside your or business facility).

In summary, keep 3 backups: 1 primary, 1 onsite, 1 offsite. This is of critical importance because your device can fail at any time without warning and for various reasons. Backing up your data is the only way to be reasonably sure that you won't lose it. You CANNOT rely on SMART to reliably tell you when your HDD is going to fail and to do so in due time to allow you to save your data.

SMART Attributes

In order to be able to use SMART you need:

  1. A HDD or SDD that supports SMART
  2. SMART enabled in the UEFI/BIOS
  3. Software to interface with SMART

Some commonly used software to interface with SMART is smartmontools, or you can find individual manufacturer's utilities on [https://www.ultimatebootcd.com/[|UBCD]]. Some people prefer smartmontools because it is easily accessible from the command line. Others prefer the manufacturer's utilities because they sometimes have more features than smartmontools. Which is better is mostly down to user preference and the details of the situation. For this article we will focus on smartmontools and more specifically smartctl.

In order to display the SMART attributes with smartmontools you need to run the following as root:

smartctl -a /dev/sda

Note that we will be assuming that /dev/sda is your HDD/SDD device node. In many cases this is the first HDD/SDD on the system, but you need to double check to make sure it is the HDD/SDD you are interested in.

The output will be something like:

bash-4.2# smartctl -a /dev/sda
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.10.63] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda (SATA 3Gb/s, 4K Sectors)
Device Model:     ST1000DM003-1CH162
Serial Number:    Z1D6DR9C
LU WWN Device Id: 5 000c50 064a62447
Firmware Version: CC49
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ACS-2 (unknown minor revision code: 0x001f)
Local Time is:    Sun Jan  4 16:02:08 2015 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  584) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 111) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3085)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   118   099   006    Pre-fail  Always       -       168101376
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       425
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   069   060   030    Pre-fail  Always       -       9675211
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3982
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       433
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   071   063   045    Old_age   Always       -       29 (Min/Max 20/29)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       25
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       504
194 Temperature_Celsius     0x0022   029   040   000    Old_age   Always       -       29 (0 18 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12154757451688
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       14098900823
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       800819281

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      3005         -
# 2  Extended offline    Completed without error       00%      2008         -
# 3  Extended offline    Completed without error       00%      1014         -
# 4  Extended offline    Completed without error       00%        13         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

This is just an example from my current HDD. Technically smartctl -a lists everything, not just attributes, but the whole output is more useful than just the attributes. Some things to note on the output is that SMART support is available and enabled. If it is not available then your device may not support SMART. If it is not enabled, go into your UEFI/BIOS settings and enable it. Also note SMART overall-health self-assessment test result: PASSED, it should be PASSED unless your HDD is failing.

Note the line Auto Offline Data Collection: Enabled, this is a feature that is enabled by default on modern internal HDDs. man smartctl explains what this feature does and how to enable it:

       -o VALUE, --offlineauto=VALUE
              [ATA only] Enables or disables  SMART  automatic  offline  test,
              which  scans  the  drive every four hours for disk defects. This
              command can be given during normal system operation.  The  valid
              arguments to this option are on and off.

Note also that the approximate times for running various tests are listed. We will discuss SMART tests in the next section.

Now about the attributes, their meaning is summarized in man smartctl:

              Each  Attribute  also has a Threshold value (whose range is 0 to
              255) which is printed under the heading "THRESH".  If  the  Nor-
              malized value is less than or equal to the Threshold value, then
              the Attribute is said to have failed.  If  the  Attribute  is  a
              pre-failure Attribute, then disk failure is imminent.

              The Attribute table printed  out  by  smartctl  also  shows  the
              "TYPE"  of  the  Attribute.  Attributes  are one of two possible
              types: Pre-failure or Old age.  Pre-failure Attributes are  ones
              which, if less than or equal to their threshold values, indicate
              pending disk failure.  Old age, or usage  Attributes,  are  ones
              which  indicate end-of-product life from old-age or normal aging
              and wearout, if the Attribute value is less than or equal to the
              threshold.   Please  note: the fact that an Attribute is of type
              'Pre-fail' does not mean that your disk is about  to  fail!   It
              only  has  this  meaning  if  the Attribute´s current Normalized
              value is less than or equal to the threshold value.
              
              If  the  Attribute´s  current  Normalized  value is less than or
              equal to the threshold value, then the "WHEN_FAILED" column will
              display  "FAILING_NOW".  If not, but the worst recorded value is
              less than or equal to the threshold value, then this column will
              display "In_the_past".  If the "WHEN_FAILED" column has no entry
              (indicated by a dash: ´-´) then this Attribute is  OK  now  (not
              failing) and has also never failed in the past.

Thus, the most important attributes are marked Pre-fail. If the value of a Pre-fail attribute is below threshold, the attribute is failing implying that the HDD is failing. A failing attribute will be marked as FAILING_NOW“ or “In_the_past” if it has failed now or in the past, respectively. Old_age attribute failures do NOT necessarily mean imminent failure, but rather that the drive is getting old and it should be monitored more carefully or replaced at some point. For the exact meaning of each attribute, please see the Wiki page. Some specific attributes that I would like to discuss are as follows: ===== #4 Start_Stop_Count and #12 Power_Cycle_Count ===== This attribute is important for laptop HDDs, because they default to powering off when not in use. Now, although laptop HDDs are designed to spin up and down more times than desktop HDD and this is an Old_age attribute, it still wears down the drive. Unless you run on batteries all the time you may want to consider turning off this feature but adding this to a boot script such as /etc/rc.d/rc.local'':

hdparm -B 254 /dev/sda

#9 Power_On_Hours

This is the age of the drive in hours. This is rather important because it tells you how old the drive is and thus how likely it is to fail. HDD failure among other things follows the Bathtub curve. As such, the highest failure rate is among very young (infant mortality) and very old (worn out) drives. This is important because I hear many people saying, “Oh, but the drive is brand new, it can't be failing.” Wrong, a new drive is more likely to fail than a middle-aged drive, much like an old drive.

#174 Unexpected power loss count

Sudden power loss is detrimental to both HDDs and SSDs. UPS power backups should be used for systems that are on all time for this reason as well as many others. Make sure to also shutdown your computer properly whenever possible to prevent data loss.

#190 Airflow_Temperature_Cel and 194 Temperature_Celsius

Although many people believe that HDDs should be kept cool and are sensitive to heat, a large Google internal study suggests that high temperatures are only significantly detrimental to old HDDs.

Sources

 howtos:hardware:smart_hdd_diagnostics ()